1 portable air conditioner with heater wa-9061h: 9,000 btu wa-1061h: 10,000btu ☆ read and retain these instructions for future reference.
2 specification · model no. Wa-9061h wa-1061h cooling capacity 9000 btu/hr 2637 w 10000 btu/hr 2930 w heating capacity 8500 btu/hr 2491 watts 9500 btu/hr 2783 watts eer 9.38 9.35 power/ampere consumption – cooling* 960w / 8.29 a 1070w / 8.7 a power/ampere consumption – heating* 840w / 7.75 a 950w / ...
3 before use general safety • only use in the upright position on a flat level surface and at least 14in. From any walls or objects (fig 1 & 4). • do not place any objects on the unit or block the air inlet / outlet (fig. 2). • closely supervise children and pets when unit is in use. Electrical safe...
4 parts front back 1. Display window 2. Control panel 3. Air outlet 4. Carrying handle 5. Caster 6. Cord storage 7. Air filter 8. Air inlet 9. Exhaust air outlet 10. Air inlet 11. Water stopper/drainage accessories fig.7 13. Exhaust hose 14. Slider kit adapter – connects exhaust hose to slider kit. ...
5 installation the unit is a portable air conditioner that may be moved from room to room. 1. Installing the plastic slider kit. Fig.8 extend both ends of the exhaust hose by few inches. Connect hose to the back of unit by turning clockwise – do not over tighten. Connect adapter piece to hose by tur...
6 carbon filter installation 1. Remove filter frame from unit. 2. Remove the filter fixer from the filter frame. 3. Remove active carbon filter from plastic bag. 4. Insert active carbon filter to filter frame. 5. Replace filter fixer to frame. The active carbon filter is now held in between the filt...
7 operation control panel 1. Mode (function) select button 2. Timer button 3. “water full” indicator 4. Sleep button 5. Fan speed button 6. Low fan speed indicator 7. High fan speed indicator 8. Receiver for remote control 9. Sleep operation indicator 10. “temperature down” button 11. On/off (power)...
8 setting fan speed 1. Press speed button to choose the desired fan speed, high or low. The corresponding indicator (hi or low) will illuminate. 2. If the unit is operating in auto mode, the speed button is invalid. Unit will automatically choose the fan speed based on the ambient temperature. Setti...
9 remote control all functions can also be performed with the supplied remote control. The remote control requires two (2) aaa batteries. Directing air flow manually adjust the louvers left & right or up & down to direct air flow. Fig. 17 notice ! To prolong the life of the compressor, after powerin...
10 drainage during the cooling process, some water will be extracted from the air into the unit. If the reservoir is full, both of the compressor (cooling) and motor (fan) will stop and unit will emit a buzz (press any button to stop the buzz); the water full indicator will also be flashing. Before ...
11 maintenance always unplug the air conditioner from power source before cleaning. Clean regularly to maximize the efficiency of the air conditioner. Cleaning the housing use a soft, damp cloth to wipe the body clean. Never use aggressive chemicals, gasoline, detergents, chemically treated cloths, ...
12 your guarantee if this product is found to be faulty as a result of faulty materials or workmanship within one year from date of purchase, it will be repaired free of charge. This guarantee is subject to the following terms: • sunpentown must be notified of the fault. • proof of purchase must be ...
