SPT WA-1061H Instructions Manual - page 9
9
Remote control
All functions can also be performed with the supplied remote control.
The remote control requires two (2) AAA batteries.
Directing air flow
Manually adjust the louvers left & right or up & down to direct
air flow.
FIG. 17
NOTICE !
To prolong the life of the compressor, after powering off the unit, please wait at least 3
minutes before turning it back on.
When operating in COOL mode, the cooling system will switch off when ambient
temperature falls below set temperature. The fan, however, will continue to run. Once
ambient temperature rises above the selected level, cooling will resume.
When operating in HEAT mode, heating will switch off when ambient temperature is
higher than set temperature. The fan, however, will continue to run. Once ambient
temperature drops below the selected level, heating will resume.
This machine is equipped with ANTI-FROST function. When unit is operating in low
temperature surroundings, the heating function may be paused at times to defrost.
When this occurs, just wait for heating to resume.
Fig.16