SRS Labs DVD-1 Instructions For Use Manual - Basic Operation
BASIC OPERATION
PAUSING PLAYBACK
Pressing the PAUSE button on the front
panel or remote will pause the
playback. To restart playback
press PLAY.
STOPPING PLAYBACK
Pressing the STOP button on the front
panel or remote will stop the play-
back.
To resume from the point where the movie
was stopped press PLAY twice.
The resume feature also applies to the last
4 discs you have played. Simply insert the
disc press PLAY if autoplay is off. When
you see the RESUME icon on the
screen press PLAY again.
FRONT PANEL DISPLAY
The front panel display gives shows useful
information concerning the operation of the
DVD player.
When a disc is first read the display will
advise on the type of disc that has been
loaded.
The example above indicates that there is a
CD disc in the player, it has 29 tracks and
the total playing time is 24 minutes and 13
seconds.
The example above indicates that there is a
DVD disc in the player. The INFO indi-
cates that this has a menu function that
needs to be selected before the disc will
start playing. Pressing PLAY will normal-
ly start the playback.
PLAYING CDs
Depending on the SETUP menu settings
the DVD-1 will automatically start playing
a CD about after 3-4 seconds and informa-
tion about the disc will be displayed on the
front panel display and the TV screen.
On the front panel display the first digit
indicates the number of the currently play-
ing track and the final digits indicate the
elapsed playing time for the current track
The small row of numbers on the bottom
line indicate the next tracks to be played.
If FTS (Favourite Track Selection) is active
the TV screen will look slightly different.
See pages 16 & 17 for more information.
If a CD is loaded and the auto start func-
tion not enabled, the display and screen
will indicate the number of tracks on the
disc and the total playing time. When all
tracks on the CD have been played, play-
back stops and this indication appears on
the display and screen.
Use the PLAY, PAUSE and STOP buttons
as previously described for operating the
player with a CD loaded.
PLAYING DVDs
As previously mentioned some DVDs have
a menu at the beginning of the disc. This
should be used to select the required func-
tion. Use the orange cursor keys and the
OK button to navigate the menu.
Some of functions normally found on the
DVD menu are as follows:-
Language selection, Subtitles selection, a
choice whether to play the film or watch
trailers and digital soundtrack selection.
At the start of some DVDs there are small
advertisements and notices that disable any
other functions while they finish playing.
DVD-1 Instructions for Use. Page 12 of 22