SRS Labs DVD-1 Instructions For Use Manual - page 16
SPECIAL FEATURES WHEN PLAYING CDs
REPEAT /A-B BUTTON
The REPEAT/A-B button allows you to
repeat either, the current track the complete
disc or a piece within a track selected by
the A-B function.
A-B PLAYBACK
Continuous play provides you with the
option of playing just a certain section of
the track over and over again.
When you reach the desired starting point,
press button A/B. The front panel display
will show the symbol A- in the middle of
the top line, this will also be indicated on
the screen.
When you reach the desired finishing part,
press the A-B button again. The letters A-
B will now be illuminated in the display
and indicated on the screen. Now the
selection you have chosen will be repeated
until the continuous play is switched off by
pressing button A-B again or by pressing
buttons STOP or SHUFFLE.
REPEAT TRACK
By pressing and holding the REPEAT but-
ton once, you can repeat the entire track
over and over again. The legend REPEAT
TRACK appears on the display and the
REPEAT 1 icon is shown on the screen.
REPEAT DISC
By pressing and holding the REPEAT but-
ton again, you can select to repeat the
entire disc over and over again. The leg-
end REPEAT appears on the display and
the REPEAT icon is shown on the screen.
Press and hold the REPEAT button again to
cancel all repeats. Pressing STOP will also
cancel the repeat function selected.
SHUFFLE BUTTON
If SHUFFLE is pressed the tracks on the
discs are not played in consecutive order
but in random order. The word SHUFFLE
appears on the display to provide a visual
reminder that the SHUFFLE function has
been activated.
The tracks in random order are also dis-
played on the screen along with the words
SHUFFLE.
To cancel shuffle mode press SHUFFLE
again.
SCAN
Press and hold the SCAN button (for
approx 1 second) to play the first 10 sec-
onds of each track on the disc. When the
desired place has been found press and
hold SCAN again and the player will con-
tinue playing normally.
FTS (Favourite Track Selection)
Once a CD has been loaded (and stopped if
it started playing) on the lower half of the
TV screen there will be two boxes. One
called ‘Exclude Tracks’, the other ‘Track
Selection’.
EXCLUDE TRACKS
To select the tracks that are not played
(Exclude tracks) press the orange LEFT
cursor key. The screen will change. You
now have the complete track list along the
top in the PLAY list and a row below
where the excluded track numbers will
appear. Move the arrow along the track list
using the left and right arrow keys. When
the track you want to exclude from the
play list is between the arrows, press the
orange DOWN button. This puts that track
number to the second row and indicates
that this track will not be played. If you
change your mind move the the cursor to
DVD-1
Instructions for Use. Page 16 of 22