SST DM-20 User Manual - Function
10
Microphone Mix DM-20
Pairing (via menu)
Select Receive info on one unit. Ready to receive pair-
ing info is shown in the display. Select New code on the
other unit; select Yes. Generate new code and send info?
is shown in the display. Select Yes (Now both the channel
and the coding information have been sent, and sound
transfer is eavesdrop-secure). To pair another unit into
your coded system, select Send info instead on one of
your paired units.
Pairing (via pairing button)
(The only way of pairing units without a display, with the
pairing button)
You can activate the Pairing function via the pairing
button. One brief press of the button opens the Pairing
menu. Two brief presses activate the Send info function.
One long press activates the Receive info function.
Pairing (Connector DT-10)
The connector cannot send information, only receive
it. To activate the position Receive info, the connector
must be in operation (position I or II) and connected to an
operating hearing aid. The selector is then quickly moved
to position 0 and back to the operating position (I or II).
The connector can now receive pairing info. If no info is
received by the connector, after a short time this returns
automatically to the previous setting.
Receiver ON
Activates the built-in receiver
Function
Here you can adjust the function button. If no choice
has been made, the microphone sends continuously the
sound it takes up.
Silence button
In this setting you can shut off the microphone so that no