SST DM-20 User Manual - page 9
9
Microphone Mix DM-20
mitted between the units by pairing.
If the message Channel combination not possible shows,
see the
Built-in receiver
section.
Transmitting/receiving of pairing information along with a
new code can be performed from any Comfort Digisystem
unit with a display. To pair units without a display, see sec-
tions
Pairing (via pairing button)
and
Pairing (Connector
DT-10)
for more information. Pairing information or a new
code key can be received by several activated units.
Comfort Digisystem units with both transmitters and
receivers built-in can be paired separately. When opening
the pairing menu, choose the concerning unit (transmit-
ter/receiver). In units with both transmitters and receiv-
ers, the pairing button controls the transmitter. The code
key is always the same for the transmitter and the re-
ceiver when these are built-in in the same unit. The easi-
est way to get the same code key in the whole Digisystem,
is to generate a new code key from the combined unit; in
that way the built-in receiver gets the same code as the
rest of the system.
DM-20