SSV Embedded Systems IGW/400-CAN User Manual - 1 Introduction
IGW/400-CAN – Introduction
S S V E M B E D D E D S Y S T E M S
3
1 INTRODUCTION
This document describes how to upgrade the firmware of the IGW/400-CAN. For further
information about the individual components of this product you may read the
IGW/400-CAN hardware reference and follow the links from our website at
http://www.ssv-comm.de.
Our website contains a lot of technical information, which will be updated in regular
periods.
1.1 Hardware
Requirements
The following hardware is needed to upgrade the IGW/400-CAN:
•
One PC with Windows 98 or higher
•
One IGW/400-CAN
•
One power supply cable
•
One plug-in power supply (6 .. 30 V)
•
One null modem cable
•
One RS232 adapter cable
•
One screw driver
•
Two jumpers
1.2 Software
Requirements
To upgrade the IGW/400-CAN firmware the Philips LPC2000 Flash Utility must be
installed on your Windows PC. You find this utility on your Starter Kit CD-ROM (rev.
1.2) in the directory CD-ROM:\isp-win32.
You can also search on the Philips website for a newer version of the flash utility. Enter
the URL http://www.semiconductors.philips.com in your browser and
search for “LPC2000 Flash Utility”.