Surveon CAM6100 Operating Instructions Manual - Network Setup Of The Camera
16
NETWORK SETUP of the camera
Before connect IP speed dome cameras to
the system, you need to setup the network
address by connecting the IP speed dome
camera directly with a PC.
NOTE: The network setting of this PC must
be set before you setup network settings of a
IP speed dome camera. Otherwise, you might
not be able to login the camera to modify
the settings. (Please refer to Page11 for the
network setup of PC).
Start up Internet Explorer on your PC.
Enter the camera default IP address, "http:
//192.168.1.2" in the address bar of the
browser to display WEB Setup Menu of IP
speed dome camera.
Enter the Accout name (factory default:
Admin) and the Password (factory default:
123456), then chosse the language, then
Click the [Login] button.
■ Connect to the camera
-20-
Preliminary Setup
Prior to connection to the system, you need to set up a
network address for the camera by one-to-one connec-
tion with a PC.
The factory default parameters are as follows:
IP address: 192.168.0.10
Subnet mask: 255.255.255.0
Gateway: 192.168.0.1
HTTP port number: 80
1. Enter an IP address, "http://192.168.0.10" for exam-
ple, in the address bar of the browser to display
the main page of the WV-NS324 camera.
2. Click the [Setup Menu] button. The authentication
dialog appears.
3. Enter "admin" in the user name line. According to
the default setting, you need not enter the pass-
word. The "Network Setup" window appears.
Network Cable (Cross type)
4. Set the following parameters.
Note: Ask your system administrator about param-
eters if you are unsure.
IP Address: Enter numbers 0 through 255 into four
sections split by dots.
Netmask: Enter numbers 0 through 255 into four
sections split by dots.
HTTP Port: Enter different numbers for each when
multiple cameras are connected.
DHCP (Dynamic Host Configuration Protocol):
When set to ON, you need not input the IP
address and netmask.
DNS (Domain Name System): Set to ON when
using DNS. Enter the primary address. If nec-
essary, enter the secondary address.
When set to AUTO, the DHCP server will auto-
matically send you an address.
DDNS (Dynamic DNS): Consult your system
administrator.
Note: You can correct the DHCP setting to off via
the Panasonic IP setting or Camera control
menu if you have wrongly set DHCP to ON in a
none-DHCP/DHCP server system.
For details refer to Setup included in the
"Panasonic IP Setup" Software provided.
5. Click the [SET&REBOOT] button. The changed
parameters will be validated, and the camera and
the PC will restart.
Notes:
• Do not omit step 4 above to validate new
parameters.
• Wait around 5 seconds or more when execut-
ing [SET&REBOOT] button.
6. Close the browser software, and the PC.
Language: 1- English
2- Traditional chinese
3- Simplified chinese
4- Japanese
NOTE: The capitalization of the Account
name and the Password must be the same as
above. Otherwise, you might fail to login.
NOTE:Besure to use the "Save and Reboot"
function after you have modified the IP speed
dome settings, otherwise no settings will be
changed.
Below is the initial procedure for you to
connect to the IP speed dome. For advanced
settings please refer to the "IP speed dome
firmware users manual" in the product CD.