Sussman SSB 12-18 Installation, Operation And Maintenance Manual - page 10
Installation, Operation & Maintenance Manual
10
24-Hour and 7-Day Time Switches
PROGRAMMING
F
or electric steam boilers equipped with Automatic
Blowdown Systems ES 81600, refer to the following instruc-
tions for time clock operation and settings.
Timer settings for blowdown operation are at
the discretion of the owner/operator.
The weekly program dial shows the seven days of the week
and AM/PM imprints for each day.
The time switch is set by pushing the captive trippers to the
outer ring position for the entire period that the load is to be turned ON, i.e., 2 hours
to each tripper on the 7-day dial. When the tripper is pushed to the inside, the switch is
in the OFF position.
SETTING TIME
To set the current time and day of week, turn
the minute hand clockwise. Do not set the time
by rotating “Outer” Dial.
Turn the minute hand clockwise until the day of
the week and the time of day on the outer dial is aligned with the triangle marker on
the inner dial (two o'clock).
Example for 7-day program dial Monday 10:30 AM.Turn the minute hand clockwise
until Monday 10:30 AM is aligned with the triangle on the inner dial.The hour and
minute hand will show exactly 10:30.
FOR MANUAL OVERRIDE
Manual override can be accomplished
at the discretion of the owner/operator as follows.
3-WAY MANUAL OVERRIDE SWITCH
I = permanent ON
I
= automatic
O = permanent OFF
O
IMPORTANT:
It is recommended that for periodic
and effective blowdown,the override switch be set
in the
automatic setting.