Sussman SSB 12-18 Installation, Operation And Maintenance Manual - page 9
Installation, Operation & Maintenance Manual
9
Digital Timer - Operation Instructions
TO SET TIME & DAY OF
CLOCK
1. Press
Menu
2.
24h AM
or
PM
blinking, press
+
or
–
to select, press
OK
3. Hour (
12
:00) blinking, press
+
or
–
to select, press
OK
4. Minute (12:
00
) blinking, press
+
or
–
to select, press
OK
5. Arrows for days
blinking,
press
+
or
–
to select, press
OK
6. Go to step 8 to continue with programming or press
Menu
to end.
TO SET TIMER ON/OFF TIMES
7. Press
MENU
and press
OK
four times to go
current time/day setting above
8.
PROG 01
blinking and
ON
symbol
displayed, press
+
or
–
to select, press OK
9. Hour (
12
:00) blinking, press
+
or
–
to select, press
OK
10. Minute (12:
00
) blinking, press
+
or
–
to select, press
OK
11. Arrows for days
blinking, press
+
or
–
to select,
press
OK
12.
PROG 02
blinking and
OFF
symbol
displayed,
press
+
or
–
to select, press
OK
13. Hour (
12
:00) blinking, press
+
or
–
to select,
press
OK
14. Minute (12:
00
) blinking, press
+
or
–
to select, press
OK
15. Arrows for days
blinking, press
+
or
–
to select. See
possible combinations below.
16. Press
MENU
to end or press
OK
and repeat steps 8 to
15 to set more
ON/OFF
times.
PROGRAMMED DAY COMBINATIONS:
Every day (arrows
on all days)
Monday to Saturday
Monday to Friday
Saturday and Sunday
Any individual day
RUN MODE
On Run mode, display will show current time/ date, on/off
status, override/automatic status, hourly on/off setting for
the day and Daylight Saving Time.
ON/OFF STATUS
ON
symbol
displayed when timer is on and
OFF
symbol
displayed when timer is off.
OVERRIDE/AUTOMATIC
When the timer is
ON
, press
+
to manually turn
the timer
OFF
and display arrow
will point to
OVR
. Press
+
again to go back to
ON
and display
arrow
will point to
AUTO
.
When the timer is
OFF
, press
+
to manually turn
the timer
ON
and display arrow
will point to
OVR
.
Press
+
again to go back to
OFF
and display
arrow
will point to
AUTO
.
When the timer is in the override mode (
on
OVR
),
timer will stay in that position until the next pro-
grammed time, at which time the arrow_will point
to
AUTO
and continue in the automatic mode.
HOURLY ON/OFF SETTING FOR THE DAY
Hash marks on the upper and right edges of the dis-
play show the hourly On times for the day. Absence
of hash mark on a specific hour indicates that the
timer is Off on that hour.
DAYLIGHT SAVING TIME.
In the Run mode, use a pencil point and press
+ HR
for Daylight Saving Time and current time advances
one hour and
+ HR
displayed. To revert back to
Standard Time, press
+ HR
and current time falls
back one hour and
+ HR
display disappears.
PROGRAMMING CONFLICTS.
Switch Off commands have priority over switch On
commands.
NOTES:
1.
The timer is set according to the boiler operation.
When the timer is ON the boiler is ON and the
blowdown is OFF.
2.
Timer must be powered up during programming
to display
ON/OFF
status.
3
. During programming, if no button is pressed after
1 minute, the timer will revert back to Run mode.
Mo
Tu
We
Th
Fr
Sa
Su
14
16
18
20
22
24
+
-
Menu OK
Res.
+1h