Sussman W500 Installation And Operating Instruction - Wall Preparation
Wall Preparation
2
WarmaTowel
Installation and Operating Instruction
®
• DO NOT mount the Warmatowel without
providing structurally secure headers as shown.
• DO NOT mount the towel warmer directly to
sheet rock or any other non-structural surface.
• Use longer fasteners as required if the finished
wall surface prevents adequate mounting with
the screws provided.
• Provide a clearance hole in the lower header
as required to route field wiring to the
WarmaTowel wiring box.
If a single gang electric box has been roughed-in,
contact the technical service dept. for a cover plate
and instructions. DO NOT install the WarmaTowel
without these instructions.
Cover plate part numbers & decorative finishes:
Polished Chrome
103854 PC
Polished Brass
103854 PB
Polished Nickel
103854 PN
Pewter
103854 P
Satin Nickel
103854 SN
Gold
103854 G
For Technical Service Assistance:
East Coast Tel: 1-800-767-8326
West Coast Tel: 1-800-727-8326
CAUTION
!
WARNING
!
®
MODEL
X"
Y"
(min)
Z
(min)
W 500
16
5
2 x 4
W 510
22
1
/
2
5
2 x 4
W 542
24
22
2 x 6
W 554
20
1
/
4
22
2 x 6
W 552
23
7
/
8
22
2 x 6
HEADER DIMENSIONS
(inches)
Lower
Header (Z)
Upper
Header (Z)
Lower
Header (Z)
Upper
Header (Z)
Finished
wall surface
Finished
wall surface
Wiring Box
Wiring Box
Y
Y
X
X