SVAT GX301 Instruction Manual - Gx301-C
GX301-C
6
SVAT ELECTRONICS
now you can see
INSTALLATION
THINGS TO CONSIDER BEFORE INSTALLATION
• The camera should be installed between 8 and 13ft above the area to be monitored
• Ensure that the camera is installed NO MORE then 100 ft away from the receiver’s position, this maintains a
strong signal between the camera and receiver
• Before securing the mount and camera, ensure there are no obstructions in the camera’s view
• Place camera in the most strategic place where it can record detailed video of every visitor. Having the camera
in the open for people to see can help deter criminals
• To cover large, dark areas such as backyards, garages, and driveways, place camera in strategic location, such as
on the roof or deck, this way more area is covered by the camera
• Ensure that the sunshade is positioned to avoid glare, also be sure to position the camera away from direct
sunlight or indoor lighting
• For best results, the light in front of the camera should be about the same brightness as the light around the
area or object being monitored
• Decide whether the camera will be wall-mounted, or mounted on a desk/table top. We recommend that the
mount is secured using the included screws and hardware for all installations
The GX301 utilizes clear signal technology, meaning
that it is designed to avoid the frequencies of
common wireless devices. By doing so, the system
does not receive interference from any of the
standardized 2.4GHz or 5.8 GHz wireless devices
within your home or business.
The signal also passes easily through interior walls.
However, buildings with metal frames or placing
the camera near large metal objects may cause
signal interference. If reception is poor, moving
the camera and/or receiver closer to one another
may fix this problem. Interference is also possible
if another device within the building (such as a
cordless phone) is operating on the same frequency.