SVAT GX301 Instruction Manual - Gx301-C
GX301-C
8
SVAT ELECTRONICS
now you can see
To pair the Camera and Receiver:
1. On the receiver, press the menu button.
2. Using the arrow buttons, scroll to “Pairing” and press OK.
3. A list of camera channels will appear numbered Camera 1 – Camera 4. If you purchased additional cameras or
your kit came with additional cameras, you will need to use a different channel for each additional camera.
4. Select the camera channel you would like to pair your camera to and press OK.
5. A screen will appear counting back from 30 seconds.
6. Within that 30 seconds, use a pin or small screwdriver to press the pairing button on the back of the camera that
you are pairing to the receiver.
7. The camera and receiver will then pair and you will see the cameras views appear on screen.
8. If you purchased additional cameras or your kit came with additional cameras repeat the above pairing steps
using different camera channels for each additional camera.
Pairing the Camera and Receiver will be necessary if the camera and Receiver do not automatically pair.
Select Camera
30 Seconds to pair
Press pair button