SVAT PI300-SD User Manual - Svat Electronics
11
PI300-SD
SVAT ELECTRONICS
now you can see
Set Motion Detection Area
Motion Detection Sensitivy Menu
DVR SETTINGS
Set Motion Detection
Adjusting the motion detection area is a convenient feature for you to customize your cover recording
experience. This option allows you to eliminate unwanted items that would trigger motion recording,
for example, a fan or television screen, allowing you to record only what is important to you.
To adjust motion detection area:
Change the edit mode by pressing the “PLAY” button on the PI300. Navigate the screen moving up,
down, left and right then select by pressing the joystick. A red square indicates that motion will not be
detected while a white square indicates that it will.
Cell Edit:
Choose a single area to turn on or off motion activated recording
Add Block:
Select the areas of the camera you don’t want motion recording
Add All:
This prevents motion recording for the entirety of the whole screen
Delete Block:
Toggle an area where you want motion detection recording
Delete All:
This sets motion recording for the entirety of the whole screen
Motion Detection Sensitivity
MD Energy
Gauges how much motion is detected on screen so you can set your desired sensitivity level with the
Motion Detection Threshold.
Motion Detection Threshold
Alter the degree of motion required to trigger motion activated recording. By decresing the reshold,
the motion detection becomes more sensitive. Likewise, increasing the threshold desensitizes motion
detection.