Sveba Dahlen AB Classic DC-1 Operating Maintenance Installation - Instrument Panel
7
Operating Maintenance Installation CLASSIC
3:3500-2 --> 860004-02
INSTRUMENT PANEL
Functions of the buttons
Button Function
Setting the time, reset to running time.
Switching of daylight-saving time
Reset button
Programming button
Return to timer function / Pulse programming
Setting the day
Setting the hour
Setting the minute
Manual on/off switch for the function
Selection of channel
Setting or changing the switching function
Weekly timer
Setting the time and the day of the week
Example: setting the timer for Wednesday, 3:22 p.m.
Button Function
Action
Setting of timer Press once
Day of the week Tryck till 3.
Hour
Press to 15.
Minute
Press to 22.
Save
Press once.
Setting a switching function
1.
On is shown in the display
2.
choose channel a or b
3.
select starting day or block of days
4.
select starting hour
5.
select starting minute
6.
Off is shown in the display
7.
select ending day or block of days
8.
select ending hour
9.
select ending minute
Select
for the next switching function or
to
return to real-time display.
When first using the equipment, or when the equipment
has been out of use for a longer time, let the timer be
connected to the mains during approx. one minute. Then
press the
button, and the display will light up after
about 75 seconds.
Changing the switching function
Press
until the correct time is shown, then change
according to the above procedure.
Erasing the switching function
Press
until the correct time is shown, then press
until ”—:—” is shown in the display.