Svec FD815 User Manual - page 2
Unpacking Information
1. FD815
x 1
2. External PowerAdapter
x 1
3. Rubber Pad
x 4
4. User'sManual
x 1
5. Marker Tie
x 16
Description
Specifications
1
Thank you for purchasing this 16-Port NWay Switch. Before you start,
please inspect the contents of this package. The package should include all
of the following:
The FD815 is a powerful, high-performance, and cost effective NWay
switch, with all 16 ports capable of 10 or 100Mbps auto-negotiation
operation(NWay), and supports IEEE 802.3x full duplex flow control and
half duplex back pressure congestion control. The Switch supports a port
based HOME VLAN function for network topology security configuration,
four Trunk groups, and three types of QoS functions to improve multi-
medium or real-time networking applications. It is ideal for micro-
segmenting large networks into smaller, connected subnets for improving
the performance of the bandwidth demanding multimedia and imaging
applications. Moreover, its 10/100Mbps Auto-Sensing ability provides an
easy w a y tomigrate 10Mbps to 100Mbps networks effortlessly.
Compared to shared 10Mbps or 100Mbps Networks, this NWay Switch
delivers a dedicated 10/100Mbps connection to every attached client with
no bandwidth congestion. While operating under full-duplex mode,
transmission and reception of the frames can occur simultaneously
without causing collisions, as well as doubling the network bandwidth.
This switch is plug-n-play, without any software to configure and is
fully compliant with all types of network protocols.
IEEE802.3 and IEEE802.3u Standards
Sixteen 10/100Mbps RJ-45 NWay Ports
(Auto MDI/MDI-X)
Network Speed: 10Mbps and 100Mbps
Duplex M o d e : F u l l a n d H a l f
4Mbits for the entire system
8K entries
10Mbps: 14,880pps/14,880pps
100Mbps: 148,800pps/148,800pps
Half-duplex:Back Pressure
Full-duplex:IEEE802.3x
Standard
Interface
NWay Protocol Support
Buffer Memory
MACAddress Table
Filtering/Forwarding Rate
Flow C ontrol