Svec FD815 User Manual - page 4
PIN 2
PIN 3
PIN 4
PIN 5
PIN 6
PIN 7
PIN 8
PIN 10,PIN 9]
The VLAN topology is control by PIN2:
OFF: Disable the V LAN function on each 16 port (default)
ON : Enable the VLAN function on each ports
OFF: It is dark (default)
ON : enable port trunk 1 which consists of ports 1,2,3,4
OFF: It is dark (default)
ON : enable port trunk 2 which consists of ports 5,6,7,8
OFF: It is dark (default)
ON : enable port trunk 3 which consists of ports 9,10,11,12
OFF: It is dark (default)
ON: enable port trunk 4 which consists of ports 13,14,15,16
Enable TCP/IP TOS/DS (Differentiated Service) based QoS
function
OFF: Disable (default)
ON : Enabled
High Priority: if TOS/DS [O,5]= (EF)"101110", (AF)"001010",
"010010","011010","100010",
(Network Control)"11X000"
Low Priority: if TOS/DS=other code point values.
Enable 802.1p VLAN Tag priority based QoS function
OFF: Disabled (default)
ON : Enabled, Port 1~4=low priority, Port5~8= high priority
[
Enable Port based priority QoS function Setting as
follows:
0: OFF, 1:ON
00:Disable port based priority (default)
01: Set port#1~2 as high priority (2 ports)
10:Set port#1~4 as high priority(4 ports)
11: Set port#1~8 as high priority(8 ports)
3