Svec FD815 User Manual - page 5
4
LEDs Definition
LED
Operation
Power Connection
Cabling
Station Connections with Twisted-Pair Cable
POWER
Power ON(Green), Power OFF (Off)
TRUNK
Enable (Green), Disable (Off)
100M
100Mbps (Green), 10Mbps(Off)
LINK/ACT
Link is present (Green),Activity (Blinking Green)
Plug the circle en d of the power adapter firmly into the rear panel
of the switch, then plug the other end into an electrical service
outlet-
the system is now ready.
These switches can use the following types o f cabling:
10Base-T Category 3,4 or 5 UTP/STP
100Base-TX Category 5 UTP/STP
Connect each station to the switch by a twisted-pair straight
cable(10Base-T or 100Base-TX cables). Plug one RJ-45 connector
into a rear-panel port of the switch and plug the other RJ-45
connector into the station's adaptor.
ò
ò