Sven NITRO Operation Manual - Eng
ENG
9
Operation Manual
NITRO
8. TROUBLESHOOTING
Problem
After installation of the software,
game controller does not work
normally.
Motors have no vibration
function in a racing game.
After entering game, some
analog axis will automatically
operate.
After entering the game,
vibration feedback operates
automatically.
During the game vibration
feedback is insufficient.
Solution
А. Check whether the controller’s link cable is strongly
connected to PC.
B. Make sure that status indication for Game Controllers after
installation is Confirm.
C. Check whether controller’s settings have no conflicts with
other peripherals’ settings.
D. Restart your PC, if the controller still doesn’t work
normally.
After exiting the game, disconnect the controller from the
USB port and connect it again. If it still can’t work normally,
please restart the computer.
The steering wheel hasn’t been calibrated or hasn’t been
confirmed after calibrations. Enter
Option – Controllers –
Dead Zone to adjust the range of the dead zone, and make
sure the axes are in the range of the dead zone.
Enter Force Feedback and calibrate it.
Enter Force Feedback and set force of feedback.
If none of the above mentioned solutions removes the problem, please refer to nearest authorized
service center for consultation by qualified specialist. Never try to repair the device on your own.
Dead Zone
Effect Zone
Effect Zone
Axes
Axes