T&C TC30 Instructions For Intallation - page 4
Other manuals for TC30:
Installation Instructions Manual
Manual is about: CHALET II BURNER KIT
of
16
5. Position the grate over the burner tray
and attach to the floor with two screws
through holes located behind the front
legs of the grate.
(Fig. # 5)
6. Attach air deflector to rear of grate with
two screws (Fig. # 6)
3. Attach the pilot supply tube to the bulk
head fitting and tighten. (Fig. # 3)
Ensure there are no leaks.
4. Connect spark electrode wire
(ORANGE) to the rear electrical bulk
head fitting. Connect the flame sensor
wire to the front electrical bulk head
fitting. (Fig. # 4)
If appliance is to used with
propane gas see propane
conversion instructions on page
#6 before proceeding.
Fig #3
Fig #4
Fig #5
Fig #6
4
TC30.NG01.C 140708