T&C TC54.NG02.C Installation And Operating Instructions Manual - Ember Material
010410-16 TC54.NG02.C
Beforeaddingtheembermaterialpleaseensurethattheceramicfibrefillerpiecesarecor-
rectly located in the bunrer as per figure #28.
Two bags of ember material is shipped with the fireplace and need to be installed to ensure
optimumperformanceandflameappearance.
Pullapartthematerialintoembersizepieces(approximately1”squares)andgentlyplace
themintothelowerburnerpan.Donotcompress,leaveitlooseforbestperformance.Fill
the lower burner pan level with the top of the pan at rear, and gradually slope forward to the
fireboxfloor,coveringbothlowerburnertubes.Placeremainingembermaterialoutsideof
the burner pan as desired to cover-up gas lines and brackets.
Note:Embermaterialplacementandamountwillaffectflameappearance.Moreember
materialresultsinlowerflameheight.Addorremoveasneededuntildesiredflameaffect.
Donotplaceanyembermaterialontheupperburnertube.
Ember Material Placement
GLOWING EMBERS
LOG GRATE
Fig. #28a
Fig. #28
CERAMIC FIBRE
FILLER PIECES
10