T&C TC54.NG02.C Installation And Operating Instructions Manual - Propane Conversion
010410-16 TC54.NG02.C
If the unit is to be used on propane convert as follows using the components
supplied with this fireplace:
WARNING
This conversion kit shall be installed by a qualified service agency in
accordance with the manufacturer's instructions and all applicable
codes and requirements of the authority having jurisdiction. If the
information in these instructions is not followed exactly, a fire,
explosion or production of carbon monoxide may result causing
property damage, personal injury or loss of life. The qualified service
agency is responsible for the proper installation of this kit. The
installation is not proper and complete until the operation of the
converted appliance is checked as specified in the manufacturer's
instructions supplied with the kit.
CAUTION
The gas supply and electrical power shall be shut off before proceeding
with the conversion.
1. Ensuretheburners,pilotsandgassupplyareturnedoff,andthe
appliance has cooled.
2. Remove the two screws securing the manifold assembly to the
lower burner, (Fig. #11)
3. Usinga1/2”wrench,undothenaturalgasburnerorifice,(marked
#28). (Fig. #12)
Note: Factory supplied components must be used to ensure correct input.
Afterconversionconfirmpropermanifoldpressure.
Fig. #11
Fig. #12
5