T&D TR-81 User Manual - page 16

14

Getting Ready

Communicating with your Computer 

Connecting the TR-81 to Your Computer

Connect a TR-81 data logger to your computer so that communication can 

occur. 

Serial Port Mark

The communication cable connection is a 

D-Sub 9 pin female. Please connect it to a 

port that has markings such as these.

* If the cable is connected to the wrong port, communication cannot take place. 

* Be sure to securely connect the cable to avoid any communication failure due to a 

loose connection.

Setting up the Communication Port

1.

In the [Communication] Menu, select [Select Serial Port]. 

2.

Check the COM port you wish to use from COM1 to COM9. 

Check one

[OK]

button

3.

Click the [OK] button to finish the setting process. 

* If no port is detected, see [Troubleshooting] on pages 24-26.