T&D TR-81 User Manual - Starting to Record

16

Basic Usage

Starting to Record

There are two ways to begin the recording process.

Start Recording via Computer 

You can set the day and time you want recording to start and can set or change all 

recording functions via the software.

1.

 Start [Hi for Windows]

2.

From the [Communication] Menu choose [Start Recording...]

3.

The following screen will be displayed from which all settings can be made.

[Setup] button

[Stop] button

[Setup Status] 

button

- Recording Interval…1/2/5/10/15/20/30 seconds, 1/2/5/10/15/20/30/60 minutes

- Recording Mode…One Time / Endless Loop

- Temperature Unit Displey…°C (Celsius) / °F (Fahrenheit) 

- Sensor Type…Pt100

- Record Starting Date…Programmed / Immediate

4.

By clicking [Setup] the settings will become active. The LCD Display on the 

main unit will display a blinking REC until the set recording date and time 

arrives.

- When you want to stop the recording function simply click on the [Stop] button in the 

[Recording Start] display in the [Communication] pull down menu. You can cancel a 

programmed start in this same way.

- When you want to check the recording settings go to the [Recording Start] display 

in the [Communication] pull down menu and click on [Present Settings] and the 

present settings will be displayed. YOU CAN NOT CHANGE THE SETTINGS WHILE 

RECORDING.