T.E.M. A07B500S Manual - page 62
A07B500S manual
Pag. 62
The second page allows to know all the transmitter operation data: frequency–power etc., without
the possibility to modify them. Choosing by the lower arrow the third page the data displaying of
the input low frequency signal and modulation can be entered:
All the pages have different coloured windows to divide the width measurements from the setting of
them. On the top of this page it’s possible to check which channel is displayed on the screen shot
(COMPOSITE); to change this display because, for example, one wants to check the LEFT course,
one must enter the lower window (MODULATION SETTINGS), and press “DATA SETTING
ENTER“. The red button will switch on, the modulation will disappear and changing in the window
“Channel Modulation“, the respective changes will be displayed on the higher window too. When
the chosen data are the requested ones it’s possible to switch the red button off and the normal
displaying will be restored.
Selecting the fourth page the power settings are entered: