T.MIX pm184x Owner's Manual - page 6
C:REAL PANEL
(1) CHANNEL INSERTS
Pre-fader/pre-EQ tip=send/Ring=return
ALT3-4 INSERTS
(3) ALT 3-4 OUTPUTS
(4) MAIN INSERTS
(5) MAIN OUTPUTS(UNBALANCED)
(6) MAIN OUTPUTS(BALANCED)
(7)BALANCED MAIN OUTPUT LEVEL SWITCHES
Via the switches, you can choose between the two different operating level settings-10dBV and +4dBU.
(8) PHANTOM POWER
When you push the switch, all mics outputs have +48V phantom power present.
(9) POWER ON FOR MIXING SECTIONS
(10) AMPLIFIER LEVEL IT CAN ADJUST THE SIGNALS LEVEL WHICH ARE SENT TO THE AMPLIFIER
(11) BALANCED INPUT FOR SIGNALS FROM AMPLIFIER
Users can get the different signals from the source according to their requirements.
LEFT binding output
red+ black-
RIGHT binding output
red+ black-
LEFT Speakon output
1+ 2+ , 1- 2-
RIGHT Speakon output
1+ 2+ , 1- 2-
POWER AND VOLTAGE SELECTIVE SWITCH
115V or 230V optinal.
POWER SUPPLY/FUSE SOCKET
Must ensure the correct specifications before replace the fuse
(18) POWER SWITCH
When it is turned on, the amplifier begins to work.
(2)
(12)
(13)
(14)
(15)
(16)
(17)
9
PM SERIES PROFESSIONAL MIXING CONSOLE
The exclamation point
triangle is used to alert the
user to important operating or
maintenance instructions.
TO TREVENT ELECTRIC SHOCK
DO NOT REMOVE COVER OR
BACK.NO USER SERVICEABLE
PARTS INSIDE REFER SERVICING
TO QUALFIED SERVICE PERSON-NEL
C A U T I O N
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION!DO not locate sensitive high-gain equipment such as
preamplifiers or tape decks drecity above or below the
unit,
Because this amplifier has a high power density,it has strong
magnetic field which can induce hum into unshielded devices that
are located nearby .The field is strongest just above and below the
unit.
If an equipment rack is used ,we recommend locating the
amplifiers in the bottom of the rack and the preamplifier or other
sensitive equipment at the top.
Magnetic Field
TO REDUCE THE RISK OF ELECTRIC
SHOCK,DO NOT EXPOSE THIS
EQUIPMENT TO RAIN OR MOISTURE
The lightning bolt
triangle is used to
alert the user to the
risk of electric shock.
WATCH FOR THESE SYMBOLS:
WARNING
PM SERIES MIXERS ARE SOUND IN FUNCTION, ADVANCED IN WORKMANSHIP AND SMALL IN SIZE. ADOPTING
THE ADVANCED SMT TECHNOLOGY MAKES THE SIZE OF THE MIXERS MUCH SMALLER AND IMPROVES THE
RELIABILITY AND S/N RATIO OF THE MIXERS.
IT IS VERY EASY TO MOVE BECAUSE THEY ARE UNIQUE HANDLES. THEY CAN ALSO BE PUT INTO THE 19' RACK
BY TAKING OFF THE HANDLES. THEY ARE THE BEST DEVICES FOR YOUR MOBILE PERFORMANCE.
USING HIGH QUALITY COMPONENTS FROM FAMOUS COMPANIES TO GUARANTEE THE QUALITY OF SIGNAL.
LOW NOISE AND HIGH GAIN 4580 OP AND 32-EFFECT DSP. POWER MIXERS WITH 2X400W AMPLIFIER
2
2