Summary of ATW series
Page 1
Atw series digital weighing scales user’s guide.
Page 2: Contents
-2- contents section 1 introduction………………………………………………………………1 section 2 specifications……………………………………………………..……2 section 3 installation……………………………………………………..……….3 3.1 general installation……………………………………………………………………3 3.2 install of atw series…………………………………………………………..………3 section 4 key descriptions…………………...
Page 3: Section 1 Introduction
Atw digital weighing scales user’s guide - 1 - section 1 introduction the atw series of scales provides an accurate, fast and versatile series of general purpose weighing scales with weighing functions. They all have stainless steel weighing platforms on an abs base assembly. All the keypads are sea...
Page 4: Section 2 Specifications
Atw digital weighing scales user’s guide -2- section 2 specifications common specifications interface rs-232 output optional stabilisation time 2 seconds typical operating temperature 0°c - 40°c / 32°f - 104°f power supply (external) 115 / 230 vac, 50/60hz, 10 watts calibration automatic external di...
Page 5: Section 3 Installation
Atw digital weighing scales user’s guide - 3 - section 3 installation 3.1 general installation the scales should be sited in a location that will not degrade the accuracy. Avoid extremes of temperature. Do not place in direct sunlight or near air conditioning vents. Avoid unsuitable tables. The tabl...
Page 6: Section 4 Key Descriptions
Atw digital weighing scales user’s guide -4- section 4 key descriptions zero or set the zero point for all subsequent weighing. The display shows zero. A secondary function , of "enter" key when setting parameters or other functions. Tare or tares the scale. Stores the current weight in memory as a ...
Page 7: Section 5 Displays
Atw digital weighing scales user’s guide - 5 - section 5 displays the lcd display will show a value and a unit to the right of the digits. In addition there are labels for tare, gross weight, zero and for low battery 888888 ok hi lo gross tare zero g/pcs oz % tkglb checkweighing symbols stability sy...
Page 8: Section 6 Operation
Atw digital weighing scales user’s guide -6- section 6 operation 6.1 zeroing the display you can press the zero/enter key at any time to set the zero point from which all other weighing and counting is measured, within 4% of power up zero. This will usually only be necessary when the platform is emp...
Page 9: 6.4 Capability Setting
Atw digital weighing scales user’s guide - 7 - check-weighing function enabled. When a weight is placed on the scale the arrows will show if the weight is above or below the limits and the beeper will sound as described below. Both limits set the display will show ok and the beeper will sound when t...
Page 10
Atw digital weighing scales user’s guide -8- section 7 battery operation the scales can be operated from the battery if desired. The battery life is approximately 100 hours. When the battery needs charging the arrow above the low battery symbol under the weight display will turn on. The battery shou...
Page 11
Atw digital weighing scales user’s guide - 9 - charging times. This is normal. If you charge your battery regularly and notice a decrease in operate time or an increase in charging time, then it is probably time to purchase a new battery..
Page 12: Section 8 Parameters
Atw digital weighing scales user’s guide -10- section 8 parameters the scale has 6 parameters that can be set by the user. These allow the user to set the scale to: display the weight in other increments of weight to min the affects of vibration, wind or other environmental conditions. Control the b...
Page 13: Section 9 Calibration
Atw digital weighing scales user’s guide - 11 - section 9 calibration 9.1 linear calibrate to start calibration turn the scale off and then turn it back on. Press the limit and unit keys together during the initial counting from 9 to 0 on the display. The display will show "unload". Remove all weigh...
Page 14: Section 10 Error Codes
Atw digital weighing scales user’s guide -12- section 10 error codes during the initial power-on testing or during operation it is possible the scale may show an error message. The meaning of the error messages is described below. If an error message is shown repeat the procedure that caused the mes...
Page 15: Www.Taiwanscale.Com
Atw digital weighing scales user’s guide - 13 - taiwan scale is a international supplier with more than 30 years experience in the production and sale of electronic weighing equipment. Products are supplied and serviced from our company locations in the china, taiwan and distributed through a world ...