TA ACON 34 User Manual
Analogue signal converter
This device has been designed to adjust signals between UVR controllers and third party
devices or industrial sensors.
It can be used to convert different signal levels or current into voltage and vice versa. Thanks
to input filters, PWM signals can also be converted into analogue values.
Conversion of 0-10 V signal into a 0-24 V signal
Conversion of 0-10 V signal into a 0-20 mA current
Freely usable level converter (input: 0-10 V or 0-20 mA), converts input into a voltage
signal with a transfer ratio that can be adjusted using two potentiometers and a jumper
Conversion of a PWM signal (500 Hz to 1 kHz/10 V) into a 0-10 V signal
ACON 34
Vers. 1.00 EN
Technische Alternative RT GmbH
A-3872 Amaliendorf, Langestr. 124
Tel +43 (0)2862 53635 mail@ta.co.at