Hl 670 data / impulse transmitter set user manual version 09/2009.
1. Global the set hl670 is ideal for transferring timing data and impulses. Its 500mw emitting power and its licence free frequency range (869 mhz) makes this device a powerful and simple to use system. Data / impulse transmission system (500 mw) which does not require a licence (free of use) in eur...
1. Functions the transmitter : 1. Impulse input for timing impulse (start gate, photocell – working / closing contact). Respect the polarities. 2. Data male sub-d 9: rs232 input for data transfer 3. Power to switch on the receiver (press for 3 seconds on power). The green led is on. To switch off th...
The receiver 1. Impulse output for timing impulse (start gate, photocell – working / closing contact). Respect the polarities. 2. Data female sub-d 9 : rs232 output 3. Power to switch on the receiver (press for 3 seconds on power). The green led is on. To switch off the receiver, hold down set and p...
2. Battery charging each device has a lithium-polymer battery with supply 2100 mah. Those batteries may be charged with our charger hl540-10 or other 12v charger with a minimum of 800 ma. For charging the battery we advise you to use our oem tag heuer charger using another model may cause some troub...
3. System utility : tag heuer hl670 configuration connect your device with the hl605-10 (delivered with the set) to your computer, run the application. Turn on the system after pressing “connect”. This application is a free download from our website : www.Tagheuer-timing.Com , it enables you to conf...
4. Software update with the firmware (already used with the chronoprinter 540 and the minitimer hl440) able you to change the transmission mode and update your device. For this application you need : • the rs232 cable (hl605-10) • a computer fitted with a d-sub9 rs232 output • the software « firmwar...
We can reduce this transmission time by increasing the baud rate from the receiver and/or the transmitter. For example, the same frame length with 115200 bps (on both sides) will only take 42ms. Those devices may be used in a “relay” configuration by plugging directly the receiver on another transmi...
6. Technical specification general o impulse response precision: +/- 1/100'000 sec o transmitting delay: 200ms o frequency : 869 mhz rec 70-03 o power 500 mw o autonomy (at +68°f / 20°c) 24 hours (1 impulse per min.) o impedance : 50 ohms o antenna 1/4 wavelength 2.5dbi o impulse input short-circuit...
Warranty : one year after delivery of your purchase the warranty is null and void under the following conditions: - if the battery isout of order - poor maintenance and obvious physical damage - input or outputs damaged by poor connection - if the device was opened without factory authorization the ...
Notes.
Tag heuer professional timing 6a louis-joseph chevrolet 2300 la chaux-de-fonds switzerland tel : 032 919 8000 fax : 032 919 9026 e-mail: info@tagheuer-timing.Com http: //www.Tagheuer-timing.Com.
