Tait TP8110 User Manual - Receiving A Two-Tone Call

46

Receiving an individual or group call

When a call is received that contains your radio’s identity, the 

radio gives a ringing tone.

To accept a call:

■

Press the PTT key and begin speaking. If the call is a group call, 

there is usually no need to respond.

Receiving a two-tone call

Two-tone signaling is used to call either individual or groups of 

radios. When your radio receives a two-tone call that it can 

decode, it beeps to indicate which type of two-tone call has been 

received.

■

One long beep: a two-tone individual call has been received.

■

Two medium beeps: a two-tone group call has been received.

■

Three short beeps: a two-tone super group call has been 

received. A super-group call is addressed to all radios in the 

fleet.

To accept the call, press the PTT key and begin speaking.

Overriding two-tone signaling

The two-tone override function allows you to override two-tone 

signaling on your current channel. When you activate two-tone 

override, the radio’s mute opens and you can hear all two-tone 

calls on the channel.

To turn two-tone override on or off:

■

Press the assigned function key.

While two-tone override is on, the LED slowly flashes green.