Tait TP8110 User Manual - Function
65
low power
transmit
Overrides the radio’s programmed transmit power
setting. See
"Low power transmit" on page 34
.
monitor
Turns monitor on and off, so that the user can hear all
traffic on a channel. See
"Checking that a channel is
clear" on page 36
.
nuisance delete Temporarily deletes the current channel from the
currently selected scan group. See
"Suspending a chan-
nel from a scan group" on page 43
.
one touch call
Sends a preset individual or group call, a DTMF preset
call or selects a channel. See
"Making one-touch preset
calls" on page 47
.
preset call
Sends a preset call programmed for the current channel.
See
"Making an individual or group call" on page 45
and
"Calling a telephone or a remote device" on
page 47
.
repeater
access tone
Sends a repeater access tone to activate the repeater
before a call is made. See
"Activating the repeater
before a call" on page 37
.
repeater
talkaround
Allows you to bypass normal repeater operation and
communicate directly with another radio. See
"Commu-
nicating directly with other radios" on page 37
.
squelch
override
Turns squelch override on and off, so the user can hear
all activity on a channel, including noise. See
"Hearing
faint and noisy signals" on page 41
.
scrambler
Turns the scrambler on and off, so the user can scramble
transmissions and decipher scrambled incoming calls.
See
"Using voice inversion scrambling" on page 39
.
two-tone
override
Turns two-tone signaling on and off, so the user can hear
traffic that would normally be muted. See
"Overriding
two-tone signaling" on page 46
.