Tait TP8110 User Manual - Led Behavior
58
The red LED lights up, and stays lit while the battery charges.
For a battery that is almost completely discharged, allow two
hours.
When charging is complete, the green LED
stays lit.
LED behavior
If there is a battery in the charger when power is supplied to the
charger, the LEDs behave as follows:
If the charger does not behave as expected:
■
Make sure the radio or battery is seated properly in the
charger.
■
Check that the charger is properly plugged in.
■
Check that the battery and charger contacts are clean. To
clean, wipe the contacts with a dry lint-free cloth to remove
any dirt, oil or grease.
LED
Meaning
briefly
The charger has been connected to a power supply.
steady
The battery is charging.
steady
Charging complete. Remove the battery, or leave it in
the charger.
steady
The battery temperature is outside the normal charg-
ing range. Charging will start or resume once the
temperature is within normal limits. No action is
required by you.
There is a fault. Contact your local regional Tait office.