Tait TP9300 User Manual - page 81
Operating in conventional mode 81
■
make a local call (see
)
■
use your address book (see
■
dial DTMF tones (overdialing)
Using a function key
Depending on how DTMF patch calls are
programmed, some or the following steps may
not be necessary.
1
Select the required channel.
2
Press the function key programmed for DTMF
patch call.
Your radio may send tones to capture the line.
3
Press
Send
, or press the function key a second
time, to send the preset number.
You may hear telephone dialing and ringing tones.
4
Proceed with your call.
5
Press
End
, or give a long press on the function
key, to end the call.
Your radio may send tones to release the line.
Using the Main menu
This feature is only available for radios with
alphanumeric keys.
To dial a DTMF patch call by using the Main menu:
Depending on how DTMF patch calls are
programmed, some or the following steps may
not be necessary.
1
Select the required channel.
2
Press
Menu
and select
Dial patch call
.
3
Dial the required number using the alphanumeric
keys.
4
Press
Send
.