Takex PB-100TK Instruction Manual
PHOTOELECTRIC BEAM SENSOR
INSTRUCTION MANUAL
We appreciate your purchase of our photoelectric beam sensor. This sensor will provide long and dependable service when properly
installed. Please read this Instruction Manual carefully for correct and effective use.
Please note:
This sensor is designed to detect intrusion and to initiate an alarm ; it is not a burglary-preventing device.
We are not responsible for damage, injury or losses caused by accident, theft, Acts of God (including inductive surge by
lightning), abuse, misuse, abnormal usage, faulty installation or improper maintenance.
PB-30TK Outdoor - 100ft (30m) / Indoor - 200ft (60m)
PB-60TK Outdoor - 200ft (60m) / Indoor - 400ft (120m)
PB-100TK Outdoor - 330ft (100m) / Indoor - 660ft (200m)
[TRANSMITTER]
COVER
COVER
Terminals
Operational
LED
Lens
Lens
View finder
Terminals
Alarm LED
Attenuation
LED
Lens
Lens
View finder
Horizontal
adjustment
Vertical
adjustment
screw
Response time
adjustment
Monitor jack
Horizontal
adjustment
Vertical
adjustment
screw
MOUNTING PLATE
MOUNTING PLATE
[OPTION PARTS]
Pole mounting plate: 2
Pole bracket: 2
[RECEIVER]
Attenuation
sheet: 1
Tapping screw: 4
DO’S AND DONT’S
•
Remove all obstructions (trees, clothes
lines, etc.) between Transmitter and
Receiver.
•
Do not install the unit on places where it
may be splashed by dirty water or direct
sea spray.
•
Avoid strong light from the sun,
automobile headlights etc. directly
shining on Transmitter / Receiver. When
strong light stays in optical axis for a long
time, it does not cause malfunction but
will affect the product life.
•
Do not install the unit on unsteady
surfaces.
•
The protection distance (between Transmitter / Receiver)
should be placed in the rated range.
PB-30TK : Outdoor : 100’ (30m) / indoor : 200’ (60m)
PB-60TK : Outdoor : 200’ (60m) / indoor : 400’ (120m)
PB-100TK : Outdoor : 330’ (100m) / indoor : 660’ (200m)
Expansion of beam
Expansion of beam can be calculated
as follows:
A=0.03 x
l
l
A
66’ (20m)
2’ (0.6m)
135’ (40m)
4’ (1.2m)
200’ (60m)
6’ (1.8m)
330’ (100m) 10’ (3.0m)
Transmitter
Receiver
Protection distance