Takex PR-11BE Instruction Manual
1
PARTS DESCRIPTION
SENSOR
Terminals
Self tapping
screw
φ4×30:2
Self tapping
screw
φ4×30:2
L fittings (BL-11)
Pole bracket : 2 pcs
Pole mounting plate : 2 pcs
Pole attachment
(BP-60A)
Response time
adjustment
Horizontal
adjustment
Vertical
adjustment
screw
COVER
MOUNTING PLATE
Lens
(Transmitter)
View finder
Lens
(Receiver)
PRODUCT DESCRIPTION
The sensor contains a transmitter and receiver.
As illustrated, an infrared beam, projected by the
transmitter, is reflected back to the receiver.
The protection loop is formed along the path from the
transmitter to the reflector and back to the receiver.
When this protection loop is interrupted, the receiver will
initiate an alam.
*As this sensor needs only one-side wiring, you can use it
in places where it's difficult to wire on two sides.
*Beam alignment can be adjusted at the sensor side only.
*Pole attachment (option parts : BP-60A) is available for
both sensor and reflector.
*L fittings (option parts : BL-11) is available for reflector
mounting.
ACCESSORY
OPTION PARTS
Thank you for purchasing our photoelectric beam sensor.
This sensor will provide long and dependable service when properly installed.
Please read this Instruction Manual carefully for correct and effective use.
Please note : This sensor is designed to detect intrusion and to initiate an alarm ; it is not a burglary-preventing device.
TAKEX is not responsible for damage, injury or losses caused by accident, theft, Acts of God ( including inductive
surge by lightning ), abuse, misuse, abnormal usage, faulty installation or improper maintenance.
Instruction Manual
PR-11BE : OUTDOOR 3.3 to 36ft. (1 to 11m)
: INDOOR 3.3 to 49ft. (1 to 15m)
PHOTOELECTRIC BEAM SENSOR
Transmitter
Sensor
Receiver
Reflector
Monitor jack
Alarm LED
(for outdoor) (for indoor)
Attenuation sheet : 2 pcs
REFLECTOR
ASSEMBLY
Reflectors
Reflector holder
Reflector
unit
Hood
Reflector mounting plate
Attenuation
LED