Talking Thermostats VIP 3000 Instruction Manual - page 6
VIP3000 Visually Impaired Programmable Thermostat / Customer Information
6
•
UP
Button: Briefly press and you’ll hear the temperature setting increase by
one degree.
•
DOWN
Button: Briefly press and you’ll hear the temperature setting decrease
by one degree.
•
BACKLIGHT AND VERSION NUMBER Button: Briefly press and the display
screen lights up. Press and hold down for 7 seconds and you’ll hear the operating
software version number of your VIP3000.
Display Screen
For important display screen information press the REPORT
button and you’ll hear:
•
Indoor Temperature in Fahrenheit. (Sighted users see the F symbol on the display
screen). If Celsius is preferred, press and hold the YES and NO buttons down
together for 7 seconds. The temperature will then play back in Celsius. (Sighted
users see the C symbol on the display screen. To return to Fahrenheit press and
hold down the YES and NO buttons again.
•
Which system setting is operating: Heat, Cool, Auto, Auxiliary or Off.
•
Temperature Setting in Fahrenheit unless changed to Celsius.
(Sighted users see two large digits for indoor temperature. Above indoor
temperature are two pairs of smaller digits. The top left pair is HEAT
temperature setting. The top right pair is COOL temperature setting)
SECTION 3: SETTING UP THE VIP3000
Now that you’re familiar where all inside panel door and external case buttons are
located, it’s time to set up your VIP3000.
Changing the Day and Time Settings
The first settings to program are the current day and time. To program, quickly
twice press the DAY/TIME
button and you’ll hear:
“Monday 12:00 AM” ”Do you want to change the Day or Time Settings? Press YES or NO.”
•
If the NO button is pressed, the day and time settings remain the same.
•
Press the YES
button and you’ll hear:
72 78
73
°
F