Talking Thermostats VIP 3000 Instruction Manual - page 9
VIP3000 Visually Impaired Programmable Thermostat / Customer Information
9
Sleep
10 PM
62º
82º
.
Changing Programmable Operation Settings
Changes to your programmable settings can be made while your VIP3000 is on the
wall or detached from it. To set up the Monday through Friday program settings,
open the front panel door, press the bottom WEEKDAY
button and you’ll hear:
”Do you want to change the program? Press YES or NO.”
•
If the NO button is pressed, the programmable settings remain the same.
•
If the YES
button is pressed you’ll hear the following:
“Press the UP or DOWN key to set WAKE time. HEAT 70 Degrees COOL 78 Degrees. 6:00
AM. Press the UP or DOWN key to set minutes. When finished press RUN.”
•
Each press of the UP or DOWN key advances the minute setting by 10-minute
increments. Press the UP
button once and you’ll hear “10”. Press it again and
you’ll hear “20”. Press the RUN button to accept your new minutes setting and
you’ll hear:
“Press the UP or DOWN key to set hour of the day. When finished press RUN.
•
Press the UP
button once and you’ll hear “7 AM”. Press it again and you’ll hear
“8 AM”. Press the RUN button to accept your new hours setting and you’ll hear a
request to set the heat set point temperature:
“Set HEAT”
•
Press the UP
button once and you’ll hear “71”. Press it again and you’ll hear
“72”. Press the RUN button to accept your new heating temperature setting and
you’ll then hear, “Set COOL”. Press the DOWN button once and you’ll hear “77”.
Press it again and you’ll hear “76”. Press the RUN button to accept your new
cooling temperature setting and you’ll then hear:
•
“Press the UP or DOWN key to set DAY time. HEAT 62 Degrees COOL 85 Degrees.
8:00 AM. Press the UP or DOWN key to set minutes. When finished press RUN.”