Talkswitch Telephone System Start Manual - page 7
E V E R Y C A L L C O U N T S
5
STEP 3 — OPEN THE TALKSWITCH MANAGEMENT SOFTWARE
1. Double-click the
TalkSwitch
Configuration 6.12 icon on
your desktop.
You can also click
Start > Programs >
TalkSwitch 6.12 > TalkSwitch
Configuration 6.12.
The
TalkSwitch Management Software
window appears, and the software
attempts to detect your TalkSwitch unit.
2. Select your language. You can select
English, Français or Español.
3. Once the software detects your
TalkSwitch unit, click
Configure
Auto-Detected TalkSwitch System.
The
About page appears.
If the software was unable to detect your
TalkSwitch unit, check that all your wires
and plugs are securely connected, and
then click
Retry Auto-Discovery. The
About page appears.
If auto-detection does not work, connect
an analog phone to the TalkSwitch unit,
and then dial
*56. The TalkSwitch unit
will provide its IP address. Click
Connect
to a Different System, and then enter
the IP address. The
About page appears.
If you want to open or create a
configuration file, click
Open a
Configuration File or Template.
For more information, refer to File menu
in Chapter 2 of the TalkSwitch User Guide.