Talkswitch TS-9112i Installation Manual - Customizing Your Phone
10
Model TS-9112i Installation Guide
Customizing your Phone
Setting your Options
There is a list of configuration options, accessed by pressing the
Ibutton.
1. Press the I button on the phone to enter the options list.
2. To go to an Option, use the V and W to scroll through the list or press
the number corresponding to the Option.
3. To select an Option, press the U
button beside the Option you want.
4. Once you are in the options menu, follow the on-screen menu
instructions to advance to the next sub-menu or to enter an option (i.e.
“Press V for next and U to enter”).
5. Follow the on-screen menu instructions to save your changes and exit
the current option.
6. Press I
or
N at any time to exit without saving changes.
The following options are configurable on the
TS-9112i IP Phone
:
Language
Select a language for the display prompts.
Note: Supported languages may vary.
Set Ring Tone
Use the W and V to scroll through the list and select an Option. Use
the volume bar R to increase or decrease the ringer volume level.
Clear Message Waiting
Use the W and V to scroll to the option and press U to clear. The light
flashes again when there are new messages waiting.
Contrast Level*
Use the navigation arrow keys to cycle through 8 contrast settings,
which brighten or darken the display.
Live Dial Pad*
This option turns the Live Dial Pad mode on or off. With Live Dial Pad ON,
the TS-9112i IP Phone automatically dials out and turns ON Handsfree mode
as soon as a dial pad key is pressed. With Live Dial Pad OFF, you must lift
the handset and dial the number first, or press the q before the
number is dialed. Press the q to turn the dial pad mode on or off.
Headset Settings
This option lets you:
a) choose your preferred audio mode
b) select your headset mic volume.