Talkswitch TS-9112i Installation Manual - Other Phone Features
Model TS-9112i Installation Guide
15
Other Phone Features
Other Phone Features
Adjusting the Volume
Pressing the volume button
u adjusts the receiver, headset,
speaker, and ringer volume.
• To adjust the ringer volume, leave the handset in the cradle and press
the volume button
u while there is no active call. There are 8
settings for the ringer — the display temporarily indicates the current
ringer volume setting.
• To adjust the handset volume, lift the handset and press the volume
button while you are on a call. The handset remains at this volume until
it is adjusted again.
• To adjust the headset volume, press the volume button while you are on
a call. The headset remains at this volume until it is adjusted again.
• To adjust the speaker volume, press the volume button while the
speaker is activated (activate the speaker by pressing q). The
speaker remains at this volume until it is adjusted again.
Status Lights
The Speaker Light, beside the q key, and the Set Indicator Light,
on the top right of your phone, provide visual indications of your
phone’s status.
Speaker Light
• Speaker light is on solid: A call is on Handsfree (speakerphone).
• Speaker light flashes slowly: The headset is being used.
• Speaker light flashes quickly: The call is muted. Press e to take the
call off mute.
Set Indicator Light
• Light flashes slowly: There are new voice messages.
• Light flashes quickly and the ringer sounds: There is an incoming call.
Timer
When you make or answer a call, the Timer shows the elapsed time of
the call.
Using a Headset with your Telephone
The TS-9112i accepts headsets through the modular jack on the back of
the phone. Contact your telephone equipment retailer or distributor to
purchase a compatible headset. Customers should read and observe all
safety recommendations contained in headset operating guides when
using any headset.