Tally Dascom DP-530 Operator's Manual - page 12
9
www.dascom.com
| +49 (0) 731 2075 0
If the device attempting to communicate with the printer is having trouble discovering the printer, setting
the value to Master may correct the problem.
Discoverability:
Possible Values: Off, On*
This feature is used to set whether the printer may be discovered by other Bluetooth devices. It should
only be set to “Off” after the printer has been discovered and paired with a host computer.
PIN
:
Possible Values: 0000*, Up to 16 Numeric Characters
.
Note that this feature is only available if Pairing Mode is set to
“Paired”. The PIN value must exactly
match the PIN value set in the Bluetooth manager on the host computer.
WI-FI Config:
Current Printer Config
This will display the current Wi-Fi configuration:
IP Address
– user defined. If Static Address Method is selected, type in the address the printer will use
on the network.
SubNetMask
– user defined. If Static Address Method is selected, type in the subnet mark of the
network.
GateWay
– user defined. If Static Address Method is selected, type in the gateway address of the
network.
Address Method
– user selectable
Static
– printer will always connect to the network using the IP address defined.
DHCP
– printer will acquire an IP address from your network DHCP server
Access Point
–The printer will broadcast itself as a network connection. The SSID will be the
serial number of the printer.
WiFi Port
– user defined. Type in the IP port to be used by the printer. (default value = 8023)
Available Networks
– access points detected by the printer will be displayed. Select Add/Connect to use one
of these access points.
Add Personal Network
Add the SSID of an ad-hoc network connection. If authentication is used select the authentication type and the
password for the network connection.
Add Enterprise Network
Add the SSID of the enterprise network connection. If authentication is used select the authentication type and
the password for the network connection.
Upload Digital Certificate
If your enterprise network uses digital certificates as another form of authentication, you can upload the
certificates here.