Tally Dascom DP-530 Operator's Manual - page 13
10
www.dascom.com
| +49 (0) 731 2075 0
B. Image Parameters
This page allows you to make selections about the image to be printed.
Current Emulation:
Possible Values: PRINTEK*, MT3, CPCL, IMAGE, PDF, POSTSCRIPT
The DP-530 printer is capable of using several different emulation modes. This feature sets the family of printer
commands that may be used by a host application program to control the various capabilities of the printer. The
printer will only respond to commands valid for the currently selected emulation. For more information, please
refer to the
Integrator’s Guide.
Besides the popular printer languages to choose from, the following selections allow the DP-530 to print many
other file formats directly, without the need for a driver.
IMAGE
– selected if just image files are being sent to the printer. When in this mode the printer will directly print
the following file types: .png, .jpg, .bmp, .pbm, .svg, .tiff
– When in this mode the printer will directly print Portable Document Files (PDF).
POSTSCRIPT
– When in this mode the printer will directly print Postscript formatted files (.ps). You can also
use a generic Postscript driver to print when in this mode.
Default Font:
The DP-530 has the ability to use True Type Fonts. All True Type Fonts loaded into printer memory are listed
here. Select the font you would like to use as the default font. All print jobs will use the default font unless a
command is sent to the printer to use another font.
Default Text Line Spacing:
NOTE: This setting only functions in Printek Emulation