- DL manuals
- Tally
- Printer
- T8106
- Operation Manual
Tally T8106 Operation Manual
Summary of T8106
Page 1
Color page printer macintosh postscript ® printer driver operation manual read this manual thoroughly and keep it at hand. T8406 t8106.
Page 2
2 · carefully read and understand this manual before using the printer. · keep this manual at hand for quick reference. Tally t8106 / t8406.
Page 3
I documentation disclaimer tally computerdrucker gmbh makes no representation or warranties of any kind whatsoever with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose. (1) tally computerdrucker gmbh shall not ...
Page 4: Introduction
Ii introduction this manual describes how to use the macintosh-compatible postscript ® (referred to as ps hereinafter) printer driver supplied with the tally t8106 / t8406, as well as precau- tions related to its use. Read this manual thoroughly to ensure optimum use of the printer driver. See the h...
Page 5: Contents
I contents chapter 1. Introduction ..................................................................................1 1.1 distribution medium .......................................................................................3 1.2 system requirements ...............................................
Page 7: Chapter 1
1 chapter 1 introduction.
Page 9
Chapter 1. Introduction 3 1.1 distribution medium the printer driver software is distributed in one cd-rom disk. 1.2 system requirements the system requirements for performing ps color printing with the tally t8106 / t8406 printer driver are as shown below. Apart from the operating system (abbreviat...
Page 11: Chapter 2
5 chapter 2 installation.
Page 13
Chapter 2. Installation 7 before installation, connect the printer to the personal computer, as explained in the hardware instruction manual. If the printer driver software is to be upgraded, first uninstall the old version of the software. Installation procedure 1. Insert the printer driver cd-rom ...
Page 14
Chapter 2. Installation 8 4. A license agreement is displayed.. After the contents are confirmed, click "accept" but- ton to continue with installation. 5. The software must be installed on the disk with the active system software. Click once on "install" to continue the process. 6. Click the "quit"...
Page 15: Chapter 3
9 chapter 3 setting up a printer with the adobeps driver.
Page 17
Chapter 3. Setting up a printer with the adobeps driver 11 after installation, the adobeps printer driver is found in the chooser. Installation procedure 1. Point to apple icon, drag the mouse to control panels, and then choose "appletalk" from the control panels. 2. Choose "ethernet", then close th...
Page 18
Chapter 3. Setting up a printer with the adobeps driver 12 3. Select the "chooser" from apple menu. 4. To select the "adobeps" printer driver, click on it once. Once you have done this, a list- ing of all printers will show up in the window on the right. If you are connected to a sin- gle network zo...
Page 19
Chapter 3. Setting up a printer with the adobeps driver 13 5. The adobeps driver will configure your printer automatically. It will find a ppd file that matches the printing device. A ppd for that printer must be present. If it fails, or if you wish to override its choice, click once on the setup bu...
Page 21: Chapter 4
15 chapter 4 setting printer driver.
Page 23: Note
Chapter 4. Setting printer driver 17 4.1 specifying the settings from the printer driver you can specify the print settings as you desire, using the file-page setup on the menu bar provided by printer driver. 4.1.1 paper set a paper size. Select the size you want from the drop-down list box. The fol...
Page 24: Memo
Chapter 4. Setting printer driver 18 4.1.2 orientation to specify the document print orientation, select a desired button (portrait or landscape). Procedure memo • portrait prints text and images on tall pages. Landscape prints text and images on wide pages. 4.1.3 scale you can enlarge or reduce a p...
Page 25: Memo
Chapter 4. Setting printer driver 19 4.1.4 booklet when this checkbox is selected, your document is set up so that pages are printed 2-up of booklets. When "portrait" is selected, the document is set up so that the booklet is printed for a vertical fold. When "landscape" is selected, the document is...
Page 26: Memo
Chapter 4. Setting printer driver 20 4.1.5 watermark select the watermark file you would like to modify from this menu. Watermark file draft watermark font system fonts watermark size 12, 18, 24, 48, 72, other (size of 4 to 1000 points is selectable.) watermark style plain, bold, italic, underline, ...
Page 27: Memo
Chapter 4. Setting printer driver 21 memo • see the help for details of each setting. For seeing the help, select “ba- loon” from “help” in the menu bar. Then move the mouse pointer on the item you want to see. 4. Select a type of watermark here. 5. Select the watermark font, size and style. 6. Sele...
Page 28: Memo
Chapter 4. Setting printer driver 22 4.1.6 visual effects you can flip an image from a document vertically and horizontally or invert the image pattern, that is, create a negative image from a positive image or vice versa. To do so, use the vertical image flip, hori- zontal image flip, and pattern i...
Page 29
Chapter 4. Setting printer driver 23 4.1.7 image & text other minor settings can be specified by options. Substitute fonts when this checkbox is selected, the printer substitutes the times font for new york, helvetica for geneva, and courier for monaco, producing higher-quality text. Smooth text whe...
Page 30: Memo
Chapter 4. Setting printer driver 24 4.1.8 custom page you can set or enter an irregular paper size, or change the paper size that was entered before. Procedure 6 the custom page default window appears. Memo • see the help for details of each setting. For seeing the help, select “ba- loon” from “hel...
Page 31: Memo
Chapter 4. Setting printer driver 25 4.2 specifying the settings from application open your application and choose file – print. Then, the printer dialog box opens, in which you can specify the settings. Memo “printer specific options” are 2 in the setting menu. However, the contents of them each ot...
Page 32: Memo
Chapter 4. Setting printer driver 26 4.2.2 pages you can specify the printing of all pages or of specified pages by selecting a radio button. Specify the printing of all pages or of specified pages on the dialog box. To specify the pages, enter the page num- bers in the edit box. Procedure memo • to...
Page 33: Memo
Chapter 4. Setting printer driver 27 4.2.3 paper source select the paper feeder which will feed the paper on which the images are printed. As the paper feeder, tray1 standard, tray2, or auto select can be selected. When selecting “tray2”, setting of “tray2” should be set to “installed” in options se...
Page 34: Memo
Chapter 4. Setting printer driver 28 4.2.4 background printing select the print in "foreground" or "background", and select the print time. When the "foreground" is selected, you must wait for the document to finish printing before you can use the computer. The document may be sent to the printer fa...
Page 35
Chapter 4. Setting printer driver 29 4.2.5 cover page select the print cover page. None when the "none" is selected, no cover page will be printed with the document. Before document when the "before document" is selected, a cover page will be printed as the first page of a document. After document w...
Page 36
Chapter 4. Setting printer driver 30 4.2.6 color matching sets a document for printing in black and white, in color or shades of gray, using colorsync color matching of postscript color matching. In case of selecting “colorsync color matching” or “postscript color matching”, printer profiles can be ...
Page 37
Chapter 4. Setting printer driver 31 4.2.7 layout you can print pages by changing layout. The image of two or four original pages can be compressed and printed on a single sheet. And sets the type of line to appear aroud the page. L page layout when images are printed vertically (portrait). 2 x 2 sh...
Page 38
Chapter 4. Setting printer driver 32 4.2.8 print on both sides set the printing method in case of having been installed duplex unit and printing as required. The printing method are vertical and horizontal. Before setting the print on both sides, setting of “duplex unit” should be set to “installed”...
Page 39
Chapter 4. Setting printer driver 33 4.2.9 color mode select printing in color or in monochrome. When the printing data is monochrome, it is printed with color print speed mode (6ppm) if "color" is se- lected, or it is printed with monochrome print speed mode (24ppm) if "monochrome" is selected. Pro...
Page 40
Chapter 4. Setting printer driver 34 4.2.10 ps color matching select the settings by "change setting for :" drop-down selection list, which control what kind of color adjustment and correction is performed when colored data is printed. Screen match "screen match" reproduces each color from the scree...
Page 41: Memo
Chapter 4. Setting printer driver 35 4.2.11 multiprint in case of installing hard disk, make the driver print each copy as a set when more than one copy is printed. As the settings, on or off can be set. Before setting the multiprint, setting of “hard disk” should be set to “installed” in options se...
Page 42
Chapter 4. Setting printer driver 36 4.2.12 resolution specifies the print resokution 600dpi or 1200dpi. (dpi : dot per inch) "standard 600 dpi" prints will be slightly faster. (this is faster from giving the print instruction to starting the printer engine than "standard 1200dpi".) "standard 1200 d...
Page 43: Memo
Chapter 4. Setting printer driver 37 4.2.13 media type set a media type on which the images are printed. Select a desired media type from the drop-down list box. The following shows the available media types. • plain • transparency • label • thick • envelope memo in case of setting “tray2” in paper ...
Page 44
Chapter 4. Setting printer driver 38 4.2.14 jam recovery set which recovery paper jam or not, when paper jam occurred. As the settings, on or off can be se- lected. Procedure 6 the printer specific options window appears..
Page 45
Chapter 4. Setting printer driver 39 4.2.15 idiom recognition set the idiom recognition. As the settings, on or off can be set. When "on", it replaces certain ps procedures (idioms) with other procedures, typically ones that have equivalent behavior but produce better-quality results or execute more...
Page 47: Chapter 5
41 chapter 5 options settings.
Page 49
Chapter 5. Options settings 43 in case of setting “duplex unit”, “tray2”, “tray3”, “hard disk” or “envelope adapter” to printer, set the options. Procedure 1. Select the “chooser” from the apple menu. 2. To select the “adobeps” printer driver, click on it once. Once you have done this, a list- ing o...
Page 50: Memo
Chapter 5. Options settings 44 3. Click once on the “configure” button. 4. Set the options, and click “ok” button. Finish the options settings. Memo • “hagaki adapter tray” is displayed in “tray1 configuration”. This printer does not support “hagaki adapter”. Do not select “hagaki adapter tray”..
Page 51: Chapter 6
45 chapter 6 precautions.
Page 53
Chapter 6. Precautions 47 precautions relating to the use of this driver are described below. (1) multiprint when hard disk is not installed in the printer, even if “multiprint” is “on” on the driver, “copies” is invalid. (2) custom do not print to “custom” from tray2 and tray3. But even if the sett...