Dygsm alarm system user manual preface esteemed guests： thank you for using our gsm alarm system. For a better understanding of this product, pls. Read this user manual thoroughly before using it. In addition , keep this instruction manual so that you may read it at anytime when necessary copyright:...
Dygsm alarm system user manual ————————————————————————————————————— 1 ——————————————————————————————————————— cautions to avoid personal injury and the damage to the product, please take the following preventive measures. Z 【input voltage】：dc12v 1a; z 【using the professional tools for assembling to...
Dygsm alarm system user manual ————————————————————————————————————— 2 ——————————————————————————————————————— chapter 1: alarm host diagram 【gsm signal indicator】 ：no sim card or searching network: flashes once every second ;gsm signal in normal: flashes once every 3 seconds 【rf signal indicator】: ...
Dygsm alarm system user manual ————————————————————————————————————— 3 ——————————————————————————————————————— 【power switch】: power on / off the back-up batteries. 【usb slot】: for a/c adapter and upgrading system as well. 【interface for the wired defense zones】:2 inputs for wired sensors.(2 wired d...
Dygsm alarm system user manual ————————————————————————————————————— 4 ——————————————————————————————————————— no:1 no:2 2. Coding of remote controllers & sensors/detectors ① in setup state→select [remote controllers/sensors] →select [enter] ② select [add] →select [enter] ③ press any button on remot...
Dygsm alarm system user manual ————————————————————————————————————— 5 ——————————————————————————————————————— no:2 3. Wireless siren setting ① in setup state→select [wireless sirens] → select [enter]。 ② select [add] → select [enter] ③ the wireless siren will be named sirens 1 by the host→select [en...
Dygsm alarm system user manual ————————————————————————————————————— 6 ——————————————————————————————————————— 5. Pair the host with your mobile phone via bluetooth ① install the app provided by manufacturer (please refer to your mobile user manual for installing) ② enabling the app on your mobile, ...
Dygsm alarm system user manual ————————————————————————————————————— 7 ——————————————————————————————————————— a).Works for door sensors only; b).After enabling the function, you will have to press & hold the [out arm] or [home arm] button for 3 seconds to arm the system if any door/window is open. ...
Dygsm alarm system user manual ————————————————————————————————————— 8 ——————————————————————————————————————— and input them into the alarm host. In addition, setting up the host to upload alarm data & arm/disarm data is needed.Now,your service provider can monitor your alarm system for you. 8.1 se...
Dygsm alarm system user manual ————————————————————————————————————— 9 ——————————————————————————————————————— 8.4 set up to upload the arm/disarm date to service provider ① in setup state → select [monitoring center] → select [enter] ② select [upload arm/disarm data] → select [enter] ③ select [yes]...
Dygsm alarm system user manual ————————————————————————————————————— 10 ——————————————————————————————————————— press (arm ) to arm the alarm panel and the led indicator lights on (siren hoots once), the system enters arm state. If there comes an intruder, the siren will hoot to deter the intruder.(...
Dygsm alarm system user manual ————————————————————————————————————— 11 ——————————————————————————————————————— when a magnet mounted near the sensor is moved away. External input for wired accessory is available at the n/c interface. The tamper protection ensures that sabotage attempts to move the ...
Dygsm alarm system user manual ————————————————————————————————————— 12 ——————————————————————————————————————— led indication flash continuously: under the self-testing state. Flash once: intruder is detected. Flash twice: self-testing is finished, enters the working mode. Normally on: under voltag...
Dygsm alarm system user manual ————————————————————————————————————— 13 ——————————————————————————————————————— ………..…..【chime zone】: set up “yes” to enable the auto search sensor(works for door sensors only) ………..…..【delayed zone】: set up “yes” to delay the system alarming & calling the preset numb...
Dygsm alarm system user manual ————————————————————————————————————— 14 ——————————————————————————————————————— 9. Monitoring center 【monitoring center number】: to edit the cid phone number, which will receive the information from the alarm system upon enabling the cid service 【admeco contact id】 : ...
Dygsm alarm system user manual ————————————————————————————————————— 15 ——————————————————————————————————————— 【format system】 :enable [yes] to delete all settings. 12.3 system about 【version】 :system version 【production date】: the date of manufacture。 【manufacture by】 : the manufacturer (da ying i...
