Talovahti 66A User Manual - page 6
DYGSM Alarm System User Manual
————————————————————————————————————— 5 ———————————————————————————————————————
No:2
3. Wireless Siren Setting
①
In Setup state→Select [Wireless Sirens] → Select [ENTER]。
②
Select [Add] → Select [ENTER]
③
The Wireless siren will be named Sirens 1 by the Host→Select [ENTER]
④
“Put Siren In setting Mode” displays on screen →Switch on the Wireless siren ,and then press the [add remote] on the siren.
⑤
Select [ENTER] →The Siren emits a Long Beep →“SET Successful” displays on screen, which indicates the coding successfully.
⑥
Select [Back] to Exit.
4. Coding of RFID Card
①
In Setup state→Select [RFID] →Select [ENTER]
②
Select[Add] → Select [ENTER]
③
Have the RFID card close to the RFID Card Reader Zone→Series Code of the sensor displays on the screen→Select [Enter] to next step
④
Name the RFID Card ,Select the [Save] to store the Name→“SET Successful” displays on screen, which indicates the coding successfully.
⑤
Select [Back] to Exit.
www.deltasecurity.cn