Talvor 480A Owner's Manual - Electrical Bed Slide

Owners Manual | 

15

Electrical bed slide

The bed is moved in and out by an electric 

motor and controlled by an electric switch, 

the location of the switch may vary 

dependant on model.

 IMPORTANT: 

• 

Please make sure no objects are 

obstructing the path of the bed slide 

before operating switch.

• 

Ensure cushions are not on moving 

parts or other stationary items in the 

vehicle to avoid jamming.

Slide-out unit

The slide-out unit is controlled by an 

electric switch located in the vehicle’s main 

switchboard. It also has a manual override 

accessible from the outside of the vehicle 

(winder handle required). 

Before operating the slide out lounge please 

familiarise yourself with the unit and refer 

to the Manufacturer’s Manual provided with 

the RV.

Please be aware that the slide-out unit is 

equipped with a safety switch that will not 

allow the vehicle to start until the unit has 

been 

fully

 retracted. 

Awning 

There are different types of awnings 

throughout the Talvor Product range. 

Please refer to Manufacturer’s Manual for 

operation and maintenance.

Please do not use the awning during rain or 

windy conditions and please make sure it is 

closed and secured before travel.

Hatches

Ensure that your hatch is completely closed 

at all times prior to travelling as this could 

not only let in excess dust and water but 

could also cause damage to the hatch due 

to excessive vibration when the hatch is 

open.

windows

Condensation may occur where there 

is insufficient ventilation or in extreme 

weather conditions. It is important to leave 

the windows partially opened to maintain 

adequate air circulation, particularly in the 

bed ends of campers when in use. Secure in 

closed position before travelling.

water pump

The on/off switch for the water pump 

is located at the main switchboard. It 

is recommended that the pump switch 

remains in the on position even when 

connected to town water. 

It is common that pumps will “cycle” when 

stationary. This can be caused by uneven 

vehicle levels or air in the lines. If this cycling 

causes concern simply turn off pump when 

not in use.

When travelling, make sure that the pump 

switch is turned off.

Please refer to Manufacturer’s Manual for 

further information on its operation.

Toilet

The toilet has a separate cassette waste 

tank. Before you use the toilet please 

switch on the water pump at the main 

switchboard and refer to the Manufacturer’s 

Manual for operation.