- DL manuals
- Tandberg Data
- Storage
- DLT-V4
- Product Specification
Tandberg Data DLT-V4 Product Specification
Summary of DLT-V4
Page 1
Dlt-v4 tape drive p r o d u c t s p e c i f i c a t i o n.
Page 2
Dlt-v4 product specification, 81-81502-01 a01, november 2005, made in usa. Copyright statement copyright 2005 by tandberg data. All rights reserved. Your right to copy this document is limited by copyright law. Making copies or adaptations without prior written authorization of tandberg data is proh...
Page 3
Dlt-v4 product specification iii contents preface ix chapter 1 physical specifications 1 physical description ........................................................................................................ 2 physical dimensions and weights ......................................................
Page 4
Contents dlt-v4 product specification iv chapter 5 environmental specifications 15 temperature and humidity ranges............................................................................ 16 altitude ....................................................................................................
Page 5
Contents dlt-v4 product specification v appendix a regulatory statements 33 environmental compliance .......................................................................................... 37 disposal of electrical and electronic equipment ...................................................... 37...
Page 6
Dlt-v4 product specification vi figures figure 1 internal tape drive mounting hole dimensions (bottom view) ....... 5 figure 2 mounting hole dimensions (side view) ................................................ 6.
Page 7
Dlt-v4 product specification vii tables table 1 physical dimensions .................................................................................... 2 table 2 weight specifications ................................................................................... 2 table 3 proper and acceptable...
Page 8
Tables dlt-v4 product specification viii table 18 random overstress non-operating vibration specifications (psd spectrum) .......................................................................................22 table 19 impact drop non-operating (packaged) shock (drop) specifications .................
Page 9
Dlt-v4 product specification ix preface this document serves as an easy-to-use information source to familiarize customers and systems professionals with the dlt-v4 tape drive system. The dlt-v4 tape drive is an extension of the digital linear tape (dlt ® ) product family. This chapter describes the...
Page 10
Dlt-v4 product specification x • chapter 3, performance specifications , describes the performance specifications of the dlt-v4 tape drive, including timing characteristics, data cartridge and media characteristics, and the reliability factors of the tape drive. • chapter 4, power specifications , d...
Page 11
Dlt-v4 product specification xi • left side of the tape drive — refers to the left side as you face the component being described. • b — all binary numbers are succeeded by “b.” • h — all hexadecimal numbers are succeeded by “h.” • error or attention conditions are represented in parenthesis that tr...
Page 12
Dlt-v4 product specification xii related documents the following documents are related to the dlt-v4 tape drive: scsi standards 0 copies of the approved version of the scsi standards may be obtained from: global engineering documents 15 inverness way, east englewood, co 80112 (800) 854-7179 or (303)...
Page 13
Dlt-v4 product specification 1 chapter 1 1 physical specifications this chapter contains the physical description of the dlt-v4 tape drive, including the internal and tabletop tape drives, and the environmental temperature and humidity specifications..
Page 14
Chapter 1 physical specifications physical description dlt-v4 product specification 2 physical description 1 physical dimensions and weights 1 table 1 physical dimensions table 2 weight specifications table 3 shows the acceptable operating orientation for the dlt-v4 tape drive. Specification interna...
Page 15
Chapter 1 physical specifications physical description dlt-v4 product specification 3 table 3 proper and acceptable dlt-v4 tape drive orientation orientation internal tape drive tabletop tape drive top side up (typical) left side down right side down.
Page 16
Chapter 1 physical specifications internal tape drive mounting hole dimensions dlt-v4 product specification 4 internal tape drive mounting hole dimensions 1 figure 1 shows the mounting holes and dimensions in a bottom view for the internal tape drive..
Page 17
Chapter 1 physical specifications internal tape drive mounting hole dimensions dlt-v4 product specification 5 figure 1 internal tape drive mounting hole dimensions (bottom view) figure 2 shows the mounting holes and dimensions in a side view for the internal tape drive. Notes: the following is addit...
Page 18
Chapter 1 physical specifications internal tape drive mounting hole dimensions dlt-v4 product specification 6 figure 2 mounting hole dimensions (side view) notes: the following is additional information for figure 2 . • the dimension referenced in boxed note [1] is from the front of the base plate. ...
Page 19
Dlt-v4 product specification 7 chapter 2 2 functional specifications this chapter contains the functional specifications of the dlt-v4 tape drive, including the led functions. Table 4 lists the key functional specifications of the dlt-v4 tape drive. Table 4 functional specifications specification va...
Page 20
Chapter 2 functional specifications dlt-v4 product specification 8 sustained transfer rate, compressed mode a up to 20 mb / sec transfer rate, burst 160 mb / sec error rate (unrecoverable) 1 in 10 17 bits (non-media error) a. Compressed values use a nominal 2:1 compression ratio. Actual compression ...
Page 21
Dlt-v4 product specification 9 chapter 3 3 performance specifications this chapter describes the performance specifications of the dlt-v4 tape drive, including timing characteristics, data cartridge and media characteristics, and the reliability factors of the tape drive..
Page 22
Chapter 3 performance specifications timing characteristics dlt-v4 product specification 10 timing characteristics 3 table 5 lists the timing characteristics of the dlt-v4 tape drive. Table 5 tape drive timing characteristics specification value read/write tape speed 118 inches per second rewind tap...
Page 23
Chapter 3 performance specifications data cartridge and media characteristics dlt-v4 product specification 11 data cartridge and media characteristics 3 table 6 lists the data cartridge and media characteristics. Table 6 data cartridge and media characteristics reliability factors 3 table 7 lists th...
Page 24
Dlt-v4 product specification 12 chapter 4 4 power specifications this chapter describes the power specifications of the dlt-v4 tape drive..
Page 25
Chapter 4 power specifications current specifications dlt-v4 product specification 13 current specifications 4 table 8 current specifications note: the +5 volt bus is 5%; the +12 volt bus is 10%. Mode 5v dc apk 5v dc arms 12v dc apk 12v dc arms dc pwr w (typ) ac pwr w (typ) ac pwr w (max) power up 1...
Page 26
Chapter 4 power specifications external power supply and chassis requirements dlt-v4 product specification 14 external power supply and chassis requirements 4 this section lists the common mode noise limitations between enclosures. The noise level cannot exceed the values listed in the following tab...
Page 27
Dlt-v4 product specification 15 chapter 5 5 environmental specifications this chapter describes the environmental specifications of the dlt-v4 tape drive. The tape drive operates in environments that include general offices and workspaces that consist of: • conditioned and marginally-conditioned are...
Page 28
Chapter 5 environmental specifications temperature and humidity ranges dlt-v4 product specification 16 temperature and humidity ranges 5 table 10 lists the operating temperature and humidity ranges of the tape drive. Table 10 operating ranges table 11 lists the non-operating storage and shipment tem...
Page 29
Chapter 5 environmental specifications altitude dlt-v4 product specification 17 altitude 5 the tape drive operates normally in pressures from -500 feet to 30,000 feet..
Page 30
Dlt-v4 product specification 18 chapter 6 6 shock and vibration specifications this chapter describes the shock and vibration specifications of the dlt- v4 tape drive. All testing was done on both the internal and tabletop tape drives..
Page 31
Chapter 6 shock and vibration specifications operating shock and vibration specifications dlt-v4 product specification 19 operating shock and vibration specifications 6 operating shock specifications 6 table 12 lists the shock specifications for the tape drive while it is operating. Table 12 half si...
Page 32
Chapter 6 shock and vibration specifications operating shock and vibration specifications dlt-v4 product specification 20 table 14 random overstress operating vibration specifications (psd spectrum) table 15 sweep / dwell operating vibration specifications power spectral density (psd) spectrum frequ...
Page 33
Chapter 6 shock and vibration specifications non-operating shock and vibration specifications dlt-v4 product specification 21 non-operating shock and vibration specifications 6 non-operating shock specifications 6 table 16 lists the shock specifications for the tape drive without its shipping packag...
Page 34
Chapter 6 shock and vibration specifications non-operating shock and vibration specifications dlt-v4 product specification 22 table 18 random overstress non-operating vibration specifications (psd spectrum) table 19 impact drop non- operating (packaged) shock (drop) specifications power spectral den...
Page 35
Chapter 6 shock and vibration specifications non-operating shock and vibration specifications dlt-v4 product specification 23 non-operating unpackaged vibration specifications 6 table 20 , table 21 , and table 22 lists the vibration specifications for the tape drive without its shipping package (non...
Page 36
Dlt-v4 product specification 24 chapter 7 7 emission and immunity specifications this chapter describes the emission and immunity specifications of the dlt-v4 tape drive. Emissions 7 the tape drive meets the following standards: • fcc cfr part 15 class b (ansi c63.4: 1992, iec/cispr 22: 1997, +a1: 2...
Page 37
Chapter 7 emission and immunity specifications emissions dlt-v4 product specification 25 radiated emissions 7 the tape drive meets the radiated emissions limits per iec/cispr 22: 1997, +a1: 2000, +a2: 2003 class b listed in table 23 . Table 23 radiated emissions limits conducted emissions 7 the tape...
Page 38
Chapter 7 emission and immunity specifications emissions dlt-v4 product specification 26 table 25 odd harmonic limits for class a equipment limits table 26 lists the even harmonic limits for class a equipment. Table 26 even harmonic limits for class a equipment harmonic order (n) maximum permissible...
Page 39
Chapter 7 emission and immunity specifications emissions dlt-v4 product specification 27 acoustic noise emissions 7 table 27 lists the acoustic noise emission levels, both as noise power and sound pressure for the tape drive. The table provides the preliminary declared values per iso 9296 and 7779 /...
Page 40
Chapter 7 emission and immunity specifications immunities dlt-v4 product specification 28 immunities 7 the tape drive meets the following standards: • emc directive (89/336/eec) • en 55024: 1998 information technology equipment – immunity (reference the basic standard iec 61000–4–n) • iec/cispr 22: ...
Page 41
Chapter 7 emission and immunity specifications immunities dlt-v4 product specification 29 table 30 radiated immunity limits fast transient immunity 7 the tape drive meets the fast transient immunity limits per en 61000–4– 4: 2004 listed in table 31 . Table 31 fast transient immunity limits surge imm...
Page 42
Chapter 7 emission and immunity specifications immunities dlt-v4 product specification 30 table 34 magnetic field immunity limits voltage dips, short interruptions, and variations immunity 7 the tape drive meets the ac dips, interruptions, and variations immunity limits per en 61000–4–11: 2004 liste...
Page 43
Chapter 7 emission and immunity specifications voltage fluctuations and flicker limits dlt-v4 product specification 31 voltage fluctuations and flicker limits 7 the tape drive meets this standard: en 61000–3–3: 2001, limitation of voltage fluctuations and flicker in low-voltage supply systems for eq...
Page 44
Dlt-v4 product specification 32 chapter 8 8 safety specifications this chapter describes the safety specifications of the dlt-v4 tape drive. Safety requirement 8 the tape drive meets the following standards: • low voltage directive (73/23/eec) • ul 60950 – us standard: safety of information technolo...
Page 45
Dlt-v4 product specification 33 appendix a a regulatory statements statements for class a equipment (internal tape drive) 1 ce notice (european union) 1 marking by the symbol indicates compliance of this tape drive to the emc directive (89/336/eec), and low voltage directive (73/23/eec) of the europ...
Page 46
Appendix a regulatory statements product manual statements for class b equipment (tabletop tape drive) dlt-v4 product specification 34 • part 8 - power frequency magnetic field requirements • part 11 - voltage dips, short interruptions and voltage variations requirements • en 55022: 1998, +a1: 2000,...
Page 47
Appendix a regulatory statements product manual statements for class b equipment (tabletop tape drive) dlt-v4 product specification 35 • reorient or relocate the receiving antenna. • increase the separation between the equipment and receiver. • connect the equipment into an outlet on a circuit diffe...
Page 48
Appendix a regulatory statements product manual statements for class b equipment (tabletop tape drive) dlt-v4 product specification 36 vcci notice (japan) 1 den-an notice (japan) 1 class b ite translation 1 this is a class b product based on the standard of the voluntary control council for interfer...
Page 49
Appendix a regulatory statements product manual statements for class b equipment (tabletop tape drive) dlt-v4 product specification 37 environmental compliance 1 the manufacturer is committed to providing quality products in an environmentally sound manner and to comply with all applicable environme...
Page 50
Dlt-v4 product specification 38 glossary a access (v.) to read, write, or update information on a storage medium, such as magnetic media. (n.) the operation of reading, writing, or updating stored information. Access time the interval between the time a request for data is made by the system and the...
Page 51
Glossary dlt-v4 product specification 39 base plate an aluminum die casting that acts as the support platform for the other modules and for the tape drive enclosure. The base plate includes the precision mounting holes used to install tape drives into a server or tape library. Bezel (also known as t...
Page 52
Glossary dlt-v4 product specification 40 d data compression a process that reduces the amount of storage space required to hold a particular block of data. Data transfer speed and total media capacity are affected by the data compression achieved. In accordance with industry practice, a typical comp...
Page 53
Glossary dlt-v4 product specification 41 eim the electronic interface module provides the main control function for the system and the interface from the system to the host computer, library, or autoloader. Emc electromagnetic compatibility. Emi electromagnetic interference. En en standards are volu...
Page 54
Glossary dlt-v4 product specification 42 g gb gigabyte si — 1,000,000,000 bytes or 10 9 . This is the international system of units (si) definition commonly used by telecommunications and storage manufacturers. Gib — 1,073,741,824 bytes, equal to 1024 3 , or 2 30 . This is the definition often used ...
Page 55
Glossary dlt-v4 product specification 43 k kb a kilobyte is a unit of measure equal to 1 thousand (1024) bytes. L led light emitting diode. Lgmr laser guided magnetic recording. Lvd low voltage differential signalling is an electrical signalling system that can run at high speeds over cheap, twisted...
Page 56
Glossary dlt-v4 product specification 44 port in referring to a fibre channel network, a port connects a node to the network. Positive engagement buckling mechanism a highly robust, solidly engineered media leader-buckling mechanism for heavy-duty-cycle automated environments. Post power-on self-tes...
Page 57
Glossary dlt-v4 product specification 45 si the international system of units. Sram s tatic ram. A memory chip that requires power to hold its content. T take-up reel t he reel inside every tape drive onto which dlttape or super dlttape media is wound. The in-the-tape drive take-up reel enables dltt...
Page 58
Glossary dlt-v4 product specification 46 v v a volt is the potential difference across a conductor when a current of one ampere dissipates one watt of power. Vcci voluntary control council for interference by information technology equipment (japan). W w the watt is the si derived unit of power. Wee...
Page 59
Glossary dlt-v4 product specification 47.
Page 60
Kjelsåsveien 161p o box 134 kjelsås 0411 oslo - norway +47 2218 9090 november 2005 81-81349-01 *81-81502-01 a01* 81-81502-01 a01.