TANDBERG H104 Instructions Manual - Display A Presentation
Display a Presentation
1. Attach the laptop or any other peripheral device to the VGA cable located
at the end of the conference table.
2. Initiate a live video conference call.
3. Select the presentation mode on your computer.
4. Press COMPUTER on the touch panel.
(RESOLUTION ON PC SHOULD NOT BE HIGHER THAN 1024 X 768)
5. To see the presentation on the TV press SELFVIEW. To display on the
projector simply press COMPUTER 1 on the gray NEC projector remote you will
not need to have it on self-view, allowing you to see the other sites. COMPUTER
must be selected on the touch panel for the other site to see your computer.
6. When finished with computer switch back to MAIN CAM.
Using the DVD/VHS Player
1. Insert your DVD/VHS into the player
2. Press DVD/VHS player on the touch panel
3. Use the gray DVD/VHS Combo Player remote to control play, pause, fast
forward and reverse.
4. DVD/VHS will automatically show to the other site
– to view in this room
press SELFVIEW.
TANDBERG QUICK REFERENCE GUIDE
USING YOUR VIDEO CONFERENCE SYSTEM