TANDBERG H104 Instructions Manual - Make A Point-to-Point Call
Make a Point-to-Point Call
Please note that in most cases your call will automatically be
connected a few minutes prior to the start of your meeting.
1. Press any button on the remote control to activate the endpoint.
2. Press the Phone Book button, located between the green and red
buttons, for the Directory.
3. Scroll down to My Contacts using the arrow buttons and press the
OK/Menu button.
4. Scroll down or up to select the person or room
you’d like to call. Make sure
you are connecting to the right room for your meeting
5. Press the green Call button to connect to the selected person.
6. Press the red End Call button twice to close the connection.
7. Muti-Site calls must be connected by the network.
TANDBERG QUICK REFERENCE GUIDE
USING YOUR VIDEO CONFERENCE SYSTEM