TANDBERG MXP Short User Manual - page 10
TANDBERG Short User manual - 10
Picture Layouts
The Layout key on the remote control has two behaviours depending on the Picture Layout
setting in Administrator Settings (see Control Panel - Administrator Settings
–
General
–
Screen Settings). It can provide either a Picture in Picture (PIP) or a Picture outside Picture
(POP). POP is recommended for wide screens.
Picture in Picture
With Picture in Picture (PIP), the layout key makes it possible to see an extra picture in a
smaller view. Pressing Layout will bring up a picture in picture in the corner of the screen.
Press Layout again to move it to the other corners of the screen and finally hide it. You can
also hide it directly by pressing and holding Layout for 1 second. PIP will always appear on
the main monitor. Automatic PIP is the system's default setting. That means that you will
automatically show Picture in Picture when it is suitable (see Control Panel - Administrator
Settings - Presentation Settings).
How to use Layout with Picture in Picture:
Press Layout once to bring up a picture in picture.
Press Layout three more times to move it around in the corners of the screen.
The fourth time you press Layout, it will disappear.
Pressing and holding Layout for 1 second will hide the small picture directly from any
position.
Remote view
Presentation
Example of Picture in Picture